4L60E o-ring needed
07-01-2013, 01:09 PM
#1
Racer
Thread Starter
4L60E o-ring needed
'94 Automatic Coupe.
Anyone know where I can find the o-ring that goes on the electrical connector for the internal wiring harness? This is the connector that externalizes all of the transmission's internal wiring. Dealer says I have to buy the whole harness for 150 bucks..
Anyone know where I can find the o-ring that goes on the electrical connector for the internal wiring harness? This is the connector that externalizes all of the transmission's internal wiring. Dealer says I have to buy the whole harness for 150 bucks..
07-01-2013, 01:37 PM
#2
Go by most any transmission shop and you should find help. 74347 might be a good Transtar part# and they might ask you to ID it from a catalog image but they should have with no problem. If you have the harness take it with you. You can buy it on line but then there's the minimum $$ buys and the ship also.
07-01-2013, 10:10 PM
#3
Race Director
You might have to buy a whole gasket/seal set. I think the one I bought cost about $20.
It's usually not profitable to carry individual bits and pieces that they might sell one of a year.
It's usually not profitable to carry individual bits and pieces that they might sell one of a year.
