Glassman89

Question for the guys that have Taylor spark plug on their L98 cars. What Taylor part number did you use? Did you change to the re-numbered distributor cap? Any problems with the #6 and #8 plug clearance? Anything I've missed?

PS This is a Super Ram car also.

Thanks,
Glassman89

Joe C

I've installed taylor wire set on several L98 cars. the part number was 74009 (spiro-pro, 8mm silicone, black). not sure what you mean by "change to the re-numbered distributor cap" - ??? I did not have any plug clearance issues with #6 or #8, as #6 will have the 135° boot. for the most part, taylor wire sets fit very well with the factory routing scheme. if you are installing on an aluminum head L98, there is a bracket the guides and separates the wires at the RH rear cylinder head. reference these threads - good info on wires and lengths, and some pics -

https://www.corvetteforum.com/forums...e-lengths.html

https://www.corvetteforum.com/forums...e-routing.html

https://www.corvetteforum.com/forums...lug-wires.html

Glassman89

Great info! Many thanks.

Snakecharmer383

I also use 8mm Taylor wires and have a SR. This is on my list to do as mine are all over the place.

Glassman89: post a pic when your done

Glassman89

Will do