When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Used vacuum advance distributor didn't work so I have the stock one controlled by the computer on there. How would I wire up the stock distributor to not use the computer ?
You can't. Just get another vacuum advance distributor.
Low and behold these garbage valve covers caused the valves not to open properly now time to put everything together😁
These valve covers weren't garbage before they were used wrong. Were these valve covers installed upside down? Who put these roller rockers on this engine without checking clearances? Have you found any bent pushrods? There's no way the valve covers would cause the valves not to open properly, unless you've got a bunch of bent pushrods! Being on only one side of the engine leads me to suspect the upside-down valve cover and bent pushrods. You CAN'T blame "garbage valve covers"!
Bent pushrods will cause loose valves. You need help from someone who knows engines. Are you having fun yet?
06-19-2017, 05:39 PM
