C4 Tech/Performance L98 Corvette and LT1 Corvette Technical Info, Internal Engine, External Engine

1989 rear exhaust hanger

Thread Tools
 
Search this Thread
 
Old 07-27-2017, 06:46 PM
  #1  
rblakeney
Racer
Thread Starter
 
rblakeney's Avatar
 
Member Since: Apr 2017
Location: Katy Texas
Posts: 396
Received 56 Likes on 46 Posts
Default 1989 rear exhaust hanger

The stock fiber hanger just before the Y into the mufflers is torn. Any source for these things ? I cannot find it online from the usual suspects. Dealer only? Fab up something ? Bailing strang?
Old 07-27-2017, 06:52 PM
  #2  
s carter
Melting Slicks
 
s carter's Avatar
 
Member Since: May 2014
Location: New Port Richey FL
Posts: 2,183
Received 438 Likes on 398 Posts
Default

Originally Posted by Robert Blakeney
The stock fiber hanger just before the Y into the mufflers is torn. Any source for these things ? I cannot find it online from the usual suspects. Dealer only? Fab up something ? Bailing strang?
Here is a Source I use for a lot of things

https://corvetteparts.com/item/hange...pipe-1986-1991

Or find an old Tire and a Skill Saw cut a new one out of the Side wall.

Last edited by s carter; 07-27-2017 at 06:56 PM.
Old 07-27-2017, 07:29 PM
  #3  
joeld
Racer
 
joeld's Avatar
 
Member Since: Sep 2007
Location: Lawrenceville Georgia
Posts: 375
Received 17 Likes on 15 Posts

Default

Walker #35241.
Last one I bought was from Autozone.

Joel
Old 07-27-2017, 07:34 PM
  #4  
s carter
Melting Slicks
 
s carter's Avatar
 
Member Since: May 2014
Location: New Port Richey FL
Posts: 2,183
Received 438 Likes on 398 Posts
Default

Originally Posted by joeld
Walker #35241.
Last one I bought was from Autozone.

Joel
Nice they even have the Muffler hangers too
Old 07-27-2017, 08:00 PM
  #5  
rblakeney
Racer
Thread Starter
 
rblakeney's Avatar
 
Member Since: Apr 2017
Location: Katy Texas
Posts: 396
Received 56 Likes on 46 Posts
Default

Thanks guys. It doesn't look the same but I'll give it a try. The original is smaller on one end and larger on the other.
Old 08-05-2017, 04:28 PM
  #6  
89dd
Burning Brakes
Support Corvetteforum!
 
89dd's Avatar
 
Member Since: Jul 2012
Location: Poughkeepsie, NY
Posts: 857
Received 76 Likes on 46 Posts

Default

I had 3 dogbone hangers fail on me.
​​​​​​I traced then lined one side with sheet steel. Hasn't failed yet.

Get notified of new replies

To 1989 rear exhaust hanger




Quick Reply: 1989 rear exhaust hanger



All times are GMT -4. The time now is 06:38 PM.