Looking for cam advice for LT4 intake on 383
#1
Instructor
Thread Starter
Looking for cam advice for LT4 intake on 383
Trying to match David's LT4 conversion intake with new 383 with 195cc heads 10.5 to 1 ratio. Looking for good performance approx 5500rpm. Any suggestions will help. Auto/3000 stall and shift kit/ stock rear end.
#3
Instructor
Thread Starter
#4
Safety Car
The cheapest and easiest thing to do is the GM LT4 Hot Cam. It will make 5500RPM in a 383 easily and work well with your stall and gearing. Even with the base AFR spring package I would recommend you run 1.65 or 1.7 ratio rocker arm on it.
I could make a little more power with a custom grind from Mike Jones's EHR series Lobes but at considerable added expense.
Will
I could make a little more power with a custom grind from Mike Jones's EHR series Lobes but at considerable added expense.
Will
The following 2 users liked this post by rklessdriver:
96 lt-4 (09-15-2017),
Street89vette (09-14-2017)
#5
Drifting
Hotcam is a good default choice.Or one of the smaller cams that Loyd Elliot offers with more lift.
http://elliottsportworks.com/home/?page_id=32
Advanced Induction has some nice grinds as well.
http://elliottsportworks.com/home/?page_id=32
Advanced Induction has some nice grinds as well.
The following users liked this post:
Street89vette (09-15-2017)
The following users liked this post:
Street89vette (09-17-2017)