source for (1993) hydraulic clutch parts - master, slave, hose...
10-17-2017, 08:12 PM
#1
Race Director
Thread Starter
source for (1993) hydraulic clutch parts - master, slave, hose...
being a slushbox guy, i don't know a lot about this -- I got a call from a friend with a 93 corvette with the 6-speed manual transmission. seems they are not having any luck finding replacements for the master and slave cylinders, and the associated hose. seems the stuff from GM/Delco is discontinued. they bought parts from O''riellys and advanced, but in both cases the parts seemed to leak. i did a forum search, and these folks came up for rebuilding services - powertorquesystems.com - went to the site, but it seems to be DOA. the only thing i could tell them is to try NAPA. so, the question - source for quality parts? suggestions, comments -- TIA for any help.
The following users liked this post:
Joe C (10-17-2017)
10-17-2017, 08:48 PM
#3
Race Director
Thread Starter
The following users liked this post:
Joe C (10-19-2017)
10-19-2017, 12:45 PM
#5
Le Mans Master
Member Since: Oct 2007
Location: Akron Ohio
Posts: 8,849
Received 1,716 Likes
on
928 Posts
2023 C5 of the Year Finalist - Modified
2022 C5 of the Year Finalist - Modified
St. Jude Donor '09-'10-'11
I have had the Wagner replacements from RockAuto in my race car for the last 8 years or so. Highly recommend.
The following users liked this post:
Joe C (10-19-2017)
10-19-2017, 01:25 PM
#6
Team Owner
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes
on
2,602 Posts
St. Jude Donor '05
no need to spend money rebuilding old stuff ;either of the above places work fine do them both at the same time
The following users liked this post:
Joe C (10-19-2017)
10-19-2017, 04:05 PM
#7
Race Director
Thread Starter
thanks for the all the replies. looks like they are going to rockauto for wagner master/slave cylinders. sent them a email on the corvette central listing for the hose assembly, so they got good info. again, thanks....
