1990 ECU 4.0 error
03-26-2018, 09:22 PM
#1
4th Gear
Thread Starter
Member Since: Mar 2018
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
1990 ECU 4.0 error
I am working on
my 1990 C4
, I bought the APU1 and G1 adapter from Moates. I have pulled the stock bin from the car and i burned it to a new chip only changes I made was tuning out the EGR. After installing the G1 adapterand new chip i am getting SYS on the digital dash and when i bridge the bins i am getting C41 codes under 1.0 and 4.0 I am getting ERR. I do not get this error with the stock chip in normal position.The MEM cal is installed in the G1. I took the http://www.tunerpro.net/download/bindefs/GM/Super_8dm2.ecu and http://www.tunerpro.net/download/datastreams/GM/8D_90-91_Corvette.adxfrom the
pro website. The only difference i can tell is I have a reman computer with
number 16198216.
Any idea on what steps I may be missing to get this error?
Any idea on what steps I may be missing to get this error?
