ryank9398

I just bought 3/8 NPT to -6AN hose ends to connect my fuel filter to the -6 fuel rail. I guess that wasn't right. Are these M16x1.5 threads on the fuel filter? How have you guys connected OE fuel lines to -6AN? Who makes the fittings? I am using push-lok (Parker) connectors from Fragola. I have a second-hand miniram, where there fuel rails made specific to f-body versus corvette?

Side note, how many hp will the stock pump support on standard 91 octane?

WVZR-1

M16x1.5 Saginaw is correct

Fuel rails are application specific but not specific to body - through '88 very similar and 89+. Do you have a particular year you're interested in?

ryank9398

Sorry I should have stated 1990 in the post.

WVZR-1

left rail '88 -'91 Corvette, '89 - '92 F body

right rail '88 + Corvette only

this is by 'part # only' and the right being different had direct relationship to fuel line routing I'm quite sure.

ryank9398

Closure: I found M16x1.5 male to -6AN male adapter from Fragola. Then I just use -6AN hose ends on both ends of the hoses.