tack is dead
#1
tack is dead
there is a lead off the dist. for the tack it goes to a electrical component the size of a aa battery its mounted on the transmission bolt this is a 90 cor. auto is it a noise suppresser or what. cant find it in manuals do I need to go to gm thanks
#2
Melting Slicks
The component you are talking about is the Tachometer filter
https://corvetteparts.com/catalog?q=tach+filter
https://corvetteparts.com/catalog?q=tach+filter
Last edited by s carter; 05-13-2018 at 10:17 PM.
#3
Team Owner
Just to smooth out the signal. I would remove it by bypassing it and seeing what happens. If the tach doesn't work still, the problem is elsewhere. Maybe your gauge or a broken wire.
#5
The component you are talking about is the Tachometer filter
Thank you one wire is pulled out now my search begins tempory out oof stock at davies thanks again dennis
https://corvetteparts.com/catalog?q=tach+filter
Thank you one wire is pulled out now my search begins tempory out oof stock at davies thanks again dennis
https://corvetteparts.com/catalog?q=tach+filter
#6
The component you are talking about is the Tachometer filter
https://corvetteparts.com/catalog?q=tach+filter
https://corvetteparts.com/catalog?q=tach+filter
#7
search "tach filter" within the C4 forum. here's a start...
https://www.corvetteforum.com/forums...ch-filter.html
https://www.corvetteforum.com/forums...ch-filter.html