I can't read my chip :(
#1
Intermediate
Thread Starter
Member Since: Oct 2002
Location: Karlskoga 02
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
I can't read my chip :(
Today when i try to read my chip my "burner" identify's my chip
as a 27C128B. And that doesnt seem right. Since this is my first ECM
operation i'am kind'a nervous. The main reason i wanted to read my chip is
that have some wierd problems with my car.
The car runned in closed loop before this operation wich i supose must mean that the chip did work before i got it out?
My burner can identify other 27C256's. :\
as a 27C128B. And that doesnt seem right. Since this is my first ECM
operation i'am kind'a nervous. The main reason i wanted to read my chip is
that have some wierd problems with my car.
The car runned in closed loop before this operation wich i supose must mean that the chip did work before i got it out?
My burner can identify other 27C256's. :\
#4
Re: I can't read my chip :( (dahlman)
That's strange. I have PB-10 and I've seen a Pocket Programmer. Neither one of them is smart enough to detect the chip, you have to tell it what you are working with.