85superram

Where would I get a set of longer lug studs???? I need them in order to correct an offset problem. Who makes them and how much????

0ski_dwn_it

I will be watching this. I need them for my 89 to be legal at the strip. The stud must enter the *head* of the lug by the diameter of the stud. Mine are a tad short if they get picky, but then again I don't have a cage yet, so that will be the least of their worries I would guess :D

tpi 421 vette

Doug Rippie Mototsports has them. 1-612-559-7605 or http://www.dougrippie.com

85superram

Hey thanks a lot, good price on them too.!!!!!

scorp508

Going full slick? :)

Mr Mojo

Got mine from Lingenfelter

0ski_dwn_it

been full :D

Guest

you can go to moroso.com and look them up there also, they a $9.98 for a pack of 5 from summit racing, only difference is they are standard thread instead of metric, :cheers:

4GTWRK

A lot of the TCC racers are using GM # 22551491. I tried the ones from Rippie and had trouble with stripped threads. I switched to the GM studs and have had great success, plus they are a little longer with a pilot on the end of them.

Dave

mvitacco

Dorman #610-323 is m12x1.5x54mm with the correct knurl.
They are about .5 inch longer than stock and found at any CarQuest
for about $2.50 per stud.
If you need longer, ARP does wheel studs for most GM cars. Most Speed
Shops will carry them or call Summit Racing.

oldjoe

Lingenfelter looks the best to me. They are extra long and are metric. The price is $29.95. Joe :chevy :chevy