Diff Suspension Questions
Thread Starter
Cruising
Joined: Apr 2026
Posts: 10
Likes: 0
Diff Suspension Questions
Two questions:
1. Any tips/good ways of removing the diff carrier bushings? They're a little worn, not perished, but you can see some tiny cracking around the rims. If it won't affect ride/handling too much, I might elect to not replace them. I really don't feel like dropping the diff.
2.Diff carrier tie rods. Is there any calibration/setting of them? Do they affect caster/camber/toe-in? A good source to find replacements?
Side question: SPC control arms - good upgrade?
Thanks
1. Any tips/good ways of removing the diff carrier bushings? They're a little worn, not perished, but you can see some tiny cracking around the rims. If it won't affect ride/handling too much, I might elect to not replace them. I really don't feel like dropping the diff.
2.Diff carrier tie rods. Is there any calibration/setting of them? Do they affect caster/camber/toe-in? A good source to find replacements?
Side question: SPC control arms - good upgrade?
Thanks
Last edited by criceo; May 7, 2026 at 09:41 PM.
Safety Car
Joined: Nov 2009
Posts: 3,969
Likes: 340
From: Adelaide South Australia
The problem with the diff carrier bushes is that there are metal shells in there.
The aftermarket replacement bushes require the metal shells to be removed.
You can have the thickness of the shell taken off the new bush with a lathe (I did that with the last diff I had)
The aftermarket replacement bushes require the metal shells to be removed.
You can have the thickness of the shell taken off the new bush with a lathe (I did that with the last diff I had)
