IS LPE219 too much cam for L98 w/LTR's
#1
Drifting
Thread Starter
IS LPE219 too much cam for L98 w/LTR's
Would a LPE 74219 be too much cam to run in an otherwise stock L98 with headers, AS&M LTRs and an Accel intake manifold? Just asking because Lingenfelter has them on sale and I was wondering if it would work with this combo when I get to it this winter.
I don't know how to get rid of this poll thing, I didn't mean to start one.
[Modified by shotchkiss, 12:22 PM 6/16/2003]
I don't know how to get rid of this poll thing, I didn't mean to start one.
[Modified by shotchkiss, 12:22 PM 6/16/2003]
#2
Safety Car
Re: IS LPE219 too much cam for L98 w/LTR's (shotchkiss)
On the occasion I have seen people running the 219 with long tube runners, they ran great.
I'd definitely go for the 219, and if you ever upgrade to the Superram, you'll already be cammed for it.
good luck
Beach Bum
I'd definitely go for the 219, and if you ever upgrade to the Superram, you'll already be cammed for it.
good luck
Beach Bum
#6
Melting Slicks
Member Since: Jan 2003
Location: What did the 5 fingers say to the face? SLAP!!
Posts: 2,167
Likes: 0
Received 0 Likes
on
0 Posts
Re: IS LPE219 too much cam for L98 w/LTR's (shotchkiss)
I'm running a bigger cam than that w/stock intake set-up and stock exhaust manifolds. Runs awesome now, even better once I get new intake and headers. The 219 will be fine, but you'll probably need a new Prom to get back your driveability.
#7
Melting Slicks
Re: IS LPE219 too much cam for L98 w/LTR's (flyersfan1088)
i run the hot cam. it pulls like hell to 5800. I have siamesd the intake base, but that whas free :) I belvie the TPI can handle more then some say.
#8
Le Mans Master
Member Since: Apr 2000
Location: DrunkDefender
Posts: 5,589
Likes: 0
Received 0 Likes
on
0 Posts
CI 1-2-3-4-5-6-7-8 Veteran
CI-IV AutoX Champ
CI-IV Burnout Champ
St. Jude Donor '07-'10
Re: IS LPE219 too much cam for L98 w/LTR's (devilfish)
I think Beach is right on.