C4 Tech/Performance L98 Corvette and LT1 Corvette Technical Info, Internal Engine, External Engine

'85 Dist Cap Wiring help

Thread Tools
 
Search this Thread
 
Old 02-18-2012, 07:01 PM
  #1  
vetzrul1
Heel & Toe
Thread Starter
 
vetzrul1's Avatar
 
Member Since: Apr 2006
Location: Nashville TN
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default '85 Dist Cap Wiring help

I've had my '85 vette torn apart for almost 8 months now replacing a leaking intake seal at the back corner and been adding some color under the hood while at it. I've managed to get EVERYTHING back together perfectly after letting it sit for that long except for one thing.

I can not remember where the wires go to that connect to the ignition coil through the dist cap. There is a white connector and a brown connector and I just don't know which one goes towards the front and which one goes towards the rear. I feel like a complete idiot right now for not being able to remember something I've done a hundred times before and pissed cause this is all that's holding me up from turning the key. Please help.
Old 02-18-2012, 07:10 PM
  #2  
blackbear bob
Racer
 
blackbear bob's Avatar
 
Member Since: Dec 2006
Location: shapleigh maine
Posts: 499
Received 26 Likes on 20 Posts

Default

the white connector is the "Bat" lead and the brown connector is the "tach"
Old 02-18-2012, 08:35 PM
  #3  
John A. Marker
Le Mans Master
 
John A. Marker's Avatar
 
Member Since: Mar 2004
Location: Dublin CA
Posts: 5,107
Received 165 Likes on 146 Posts

Default

with blackbear bob.
Old 02-19-2012, 12:10 AM
  #4  
Cliff Harris
Race Director
 
Cliff Harris's Avatar
 
Member Since: Apr 2002
Location: Anaheim CA
Posts: 10,036
Likes: 0
Received 341 Likes on 312 Posts

Default

Look closely at the connectors. They are keyed with a ridge. You can't get them in the wrong place unless you gorilla them into place.
Old 02-19-2012, 12:36 AM
  #5  
vetzrul1
Heel & Toe
Thread Starter
 
vetzrul1's Avatar
 
Member Since: Apr 2006
Location: Nashville TN
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for the info. Once I got them into the cap it clicked in my head that it looked exactly right. So went to turn the key after a loooong wait and....the battery was dead Maybe I'll get to start it tomorrow.

Get notified of new replies

To '85 Dist Cap Wiring help




Quick Reply: '85 Dist Cap Wiring help



All times are GMT -4. The time now is 10:03 PM.