zikuslt1

I just put a new Mr.Goodwrench Chevy 350 in my 91 Cadillac part#12513151. My Chevy dealer does not have any specs. on this engine such as horsepower, 4 or 2 bolt mains,timing settings... Does anyone here work at a Chevy dealer who might be able to get me some of this info? I've tried the GM websites to no avail. I tried this question in the "Other Cars" section but couldn't get many answers. Also the oil pan that came with this engine only takes 41/2 qts. of oil with the AC PF25 filter. All my other cars with chevy small blocks take 5 qts. with filter. Any answers would be appreciated.
Thanks!

95 LT1 coupe
91 Cadillac Brougham
71 Bel Air

h rocks

Which 350 is it? If it's a GM crate motor, all the specs are listed in the catalog down to the valve springs etc. They also list the typical dyno results.

Ok, dug up my GMPP book. It shows that part number as a "Caprice TBI" engine. Roller cam, PM rods, 64cc heads. They don't list the details in the particular catalog I have from Jim Pace GM Parts Warehouse. Give them a call for the details. (888.748.4675)

[This message has been edited by h rocks (edited 07-30-2001).]

want2drivemy85

if thats the gm goodwrench motor that sells for around 1300 bucks. its rated around 250 hp, and has around 8.5:1 compression.