R. I. P 1992 #474
#21
dbriana,
Just an update. We finally got car to Pete's garage, thank you Paul Workman. We picked the worst weekend in Chicago to move the car. Paul and I spent 3 hours in freezing rain gettiing rhe car up on wheels and loaded onto UHaul trailer. So I can now start filling some requests. Pass. side fog and turn signal didn't make it. Driver's side in good shape however. Clutch switch is sold although I have a second one if you are still interested. Antenna is fine also.
If you are still interested please confirm and I'll start pulling parts this week.
Just an update. We finally got car to Pete's garage, thank you Paul Workman. We picked the worst weekend in Chicago to move the car. Paul and I spent 3 hours in freezing rain gettiing rhe car up on wheels and loaded onto UHaul trailer. So I can now start filling some requests. Pass. side fog and turn signal didn't make it. Driver's side in good shape however. Clutch switch is sold although I have a second one if you are still interested. Antenna is fine also.
If you are still interested please confirm and I'll start pulling parts this week.
Sure was a nice ZR-1. Sorry about your loss.
#22
Le Mans Master
Thread Starter
We're gonna try and make the Black Rose look and run even better
Last edited by Dominic Sorresso; 12-14-2010 at 08:24 PM.
#23
Intermediate
Member Since: Feb 2007
Location: Wichita Kansas
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Confirming I am still interested in the items listed below. Thought I confirmed this a couple of days ago, but post is not shown -- hum?
Troy
Troy
#30
Le Mans Master
Thread Starter
OK. Car is in garage and now parts are available. I'm going to ask mods to close this thread so I have final parts requests and the order as received. As an FYI, the parts availability has been posted on ZR-1 Registry and in C4 Parts F/S, and PMs as well. I have kept list of requests in chronological order. I will start new thread in ZR-1 section to begin fulfilling parts requests. I prefer checks rather than Paypal unless amount is <$100.
Last edited by Dominic Sorresso; 12-23-2010 at 11:16 PM.
#32
Le Mans Master
Thread Starter
Just to clarify, I will honor previous requests and have a chronological record of them. I have been in the process of communicating with those individuals to determine if they are still interested. Some have found parts elsewhere. Those parts would become available to those posting on this thread http://forums.corvetteforum.com/c4-p...post1576320283 and a thread I have at Registry site. I'd like to use these threads rather than PMs for requests although I will PM regarding pricing and shipping.
So if you're still interested in the parts let me know, and if yours is a new request please post it here and I will get back to you.
So if you're still interested in the parts let me know, and if yours is a new request please post it here and I will get back to you.
#36
Burning Brakes
Member Since: May 2006
Location: Morrisonville Illinios
Posts: 857
Likes: 0
Received 1 Like
on
1 Post
Sorry about your loss. Had something similar in the 70's on my Z car had front frame member crack going into a corner (the worker said looked like I was lined up great) but the dam thing would not turn stuffed the front tire into the drivers floor and bent the rear suspension.
I would be interest in the 2 rear plastic lock covers on the rear compartments behind the seats and the rear trim panel that is just under the hatch on the left side can send a pic so we can make sure we are talking apples/apples, also a rear back up switch on the tranny. The zip is 62546.
Good Luck on your new project
Thanks wro87
I would be interest in the 2 rear plastic lock covers on the rear compartments behind the seats and the rear trim panel that is just under the hatch on the left side can send a pic so we can make sure we are talking apples/apples, also a rear back up switch on the tranny. The zip is 62546.
Good Luck on your new project
Thanks wro87
#37
Le Mans Master
Thread Starter
Sorry about your loss. Had something similar in the 70's on my Z car had front frame member crack going into a corner (the worker said looked like I was lined up great) but the dam thing would not turn stuffed the front tire into the drivers floor and bent the rear suspension.
I would be interest in the 2 rear plastic lock covers on the rear compartments behind the seats and the rear trim panel that is just under the hatch on the left side can send a pic so we can make sure we are talking apples/apples, also a rear back up switch on the tranny. The zip is 62546.
Good Luck on your new project
Thanks wro87
I would be interest in the 2 rear plastic lock covers on the rear compartments behind the seats and the rear trim panel that is just under the hatch on the left side can send a pic so we can make sure we are talking apples/apples, also a rear back up switch on the tranny. The zip is 62546.
Good Luck on your new project
Thanks wro87