Performance regrinds or OEM cams for sale
02-14-2016, 01:33 PM
#1
Drifting
Thread Starter
Performance regrinds or OEM cams for sale
Performance regrinds are 236 intake .425 lift and 222 exhaust .415 lift
850 for set of stock cams or regrinds $1500 outright purchase
Price does not include shipping
Regrinds are new and never run
Cam profile was designed by Dave Generous who did the Sledgehammer cam, these were designed for Callaway who ended up not pursuing use of cams due to the need to pass EPA testing with them.
850 for set of stock cams or regrinds $1500 outright purchase
Price does not include shipping
Regrinds are new and never run
Cam profile was designed by Dave Generous who did the Sledgehammer cam, these were designed for Callaway who ended up not pursuing use of cams due to the need to pass EPA testing with them.
02-14-2016, 02:06 PM
#2
Drifting
Thread Starter
I have these on my 90 ZR-1.....with the exception my primary intake lobe is 222 .415 on the intake; the car made 441RWHP without tuning. These have both intake lobes at 236. .425 so they should be good for more power, with head porting
02-14-2016, 02:08 PM
#3
Drifting
Thread Starter
02-24-2016, 08:50 PM
#6
Drifting
When my 94 no longer has to pass emissions cams are a must. you can put me down for a set, but not until 2018.
Last edited by USAFPILOT; 02-24-2016 at 08:50 PM.
03-12-2016, 12:25 PM
#7
Drifting
Thread Starter
bump, these are a bargin, buy these outright, sell your stockers and have a cam upgrade cheap
