Upper shroud on a 94 ZR-1
#2
There are about 5-6 screws along the top edge of the shroud and a couple along each side and 4 at the intake under the front bumper. Once they are all off, you will need to carefully raise the drivers side of the shroud and maneuver the passenger side from around the high side A/C line connector. You need to be careful because you can crack the shroud while doing this, ask me how I know... If you are patient and careful, it's not too bad.
Rich
Rich
Last edited by Scrrem; 07-17-2017 at 12:29 PM.