FS: ZR1 fitment 18" CCW Classic wheels
#1
Instructor
Thread Starter
FS: ZR1 fitment 18" CCW Classic wheels
This is a set of original CCW classics in C4 ZR1 fitment. They are 18x11 and 18x13. Tires are 15 years old so not much life left. Probably 15k miles on the setup since new. The center caps are cut out from CCW to fit factory C4 center caps.
Wheels are in great shape, but need to be polished to be 100% as you see on the pictures. Just no time to do it. The hoops are bare Al. They polish up like a mirror. The centers are anodized black, not painted.
All four wheels have a single small nick. I believe from tire installer. They could be wet sanded and polished out, never bothered me as you can't see it unless on your knees. No curb rash or damage.
Putting my car back to stock look, so no need for these. I can have tires dismounted if that helps. Would prefer local deal on Wisconsin. Can ship at buyer's expense and arrangement.
Wheel pics: https://flic.kr/s/aHskyYPQZj
On my car here: https://flic.kr/s/aHskyqTe9d
Wheels are in great shape, but need to be polished to be 100% as you see on the pictures. Just no time to do it. The hoops are bare Al. They polish up like a mirror. The centers are anodized black, not painted.
All four wheels have a single small nick. I believe from tire installer. They could be wet sanded and polished out, never bothered me as you can't see it unless on your knees. No curb rash or damage.
Putting my car back to stock look, so no need for these. I can have tires dismounted if that helps. Would prefer local deal on Wisconsin. Can ship at buyer's expense and arrangement.
Wheel pics: https://flic.kr/s/aHskyYPQZj
On my car here: https://flic.kr/s/aHskyqTe9d
Last edited by 90z; 04-14-2018 at 01:20 PM.
#8
Instructor
Thread Starter
The tires are 275/35 ZR18 in front and 335/30 ZR18 in the rear. If I recall the same as gen2 Vipers. The Speedo is still accurate as the rolling radius is very close to stock.
The following users liked this post:
combatdoc (08-07-2018)
#10
Hmmm... Do you happen to know the offsets on these wheels? Wondering if I could make these work on a C5 with wide rear quarters. I'm in MN so picking them up isn't out of the question for me.
#11
Instructor
Thread Starter
#14
This is a set of original CCW classics in C4 ZR1 fitment. They are 18x11 and 18x13. Tires are 15 years old so not much life left. Probably 15k miles on the setup since new. The center caps are cut out from CCW to fit factory C4 center caps.
Wheels are in great shape, but need to be polished to be 100% as you see on the pictures. Just no time to do it. The hoops are bare Al. They polish up like a mirror. The centers are anodized black, not painted.
All four wheels have a single small nick. I believe from tire installer. They could be wet sanded and polished out, never bothered me as you can't see it unless on your knees. No curb rash or damage.
Putting my car back to stock look, so no need for these. I can have tires dismounted if that helps. Would prefer local deal on Wisconsin. Can ship at buyer's expense and arrangement.
Wheel pics: https://flic.kr/s/aHskyYPQZj
On my car here: https://flic.kr/s/aHskyqTe9d
Wheels are in great shape, but need to be polished to be 100% as you see on the pictures. Just no time to do it. The hoops are bare Al. They polish up like a mirror. The centers are anodized black, not painted.
All four wheels have a single small nick. I believe from tire installer. They could be wet sanded and polished out, never bothered me as you can't see it unless on your knees. No curb rash or damage.
Putting my car back to stock look, so no need for these. I can have tires dismounted if that helps. Would prefer local deal on Wisconsin. Can ship at buyer's expense and arrangement.
Wheel pics: https://flic.kr/s/aHskyYPQZj
On my car here: https://flic.kr/s/aHskyqTe9d
I may be interested in the wheels but let me know if they would fit a 1991 ZR-1 without modifications to the body.
Cheers.
#15
Le Mans Master
Member Since: Jan 2000
Location: Georgetown TX
Posts: 8,433
Received 1,868 Likes
on
1,084 Posts
C5 of Year Finalist (appearance mods) 2019
Here's the offset numbers someone requested. John @ CCW once told me max backspacing on the rear of a C4 ZR-1 is 8.4". Stock 17x11's have 7.4" so those 18x13 rears should fit a 90-95. Just be aware that the plastic 94-95 inner fenders have a protruding nub, that must be ground off. Very easy to do and only takes a minute, or so. Earlier cars don't have that issue.
On the front, the stock 17x9.5 wheels also have 7.4" backspacing so those 18x11's should be ok,too.
If those tires are 15yrs old, they are toast and should be replaced.
On the front, the stock 17x9.5 wheels also have 7.4" backspacing so those 18x11's should be ok,too.
If those tires are 15yrs old, they are toast and should be replaced.
Last edited by USAZR1; 06-21-2018 at 12:07 AM.
The following users liked this post:
90z (06-21-2018)
#16
Instructor
Thread Starter
As replied by USAZR1, yes they should fit. I bought these wheels from John Purner when he was running CCW and they were specifically made for C4 ZR1 body.
#17
I understand you are asking for $1,850 for the set. At your discretion, would you consider a discount because I will ship the wheels outside the US by air and it will cost me a bunch.
When you reply, I will see how to pay you. However, you will need to help me and ship them to a New York address at my own expense off course.
By he way what is the address where you are at the moment in case I can arrange for collection.
#18
Instructor
Thread Starter
Shipping is from 54927. I can ship if needed after all funds clear.
All PMs and offers replied to. Please be real buyers, lots of 'wheel kickers' out there
All PMs and offers replied to. Please be real buyers, lots of 'wheel kickers' out there
Thank you for your answer.
I understand you are asking for $1,850 for the set. At your discretion, would you consider a discount because I will ship the wheels outside the US by air and it will cost me a bunch.
When you reply, I will see how to pay you. However, you will need to help me and ship them to a New York address at my own expense off course.
By he way what is the address where you are at the moment in case I can arrange for collection.
I understand you are asking for $1,850 for the set. At your discretion, would you consider a discount because I will ship the wheels outside the US by air and it will cost me a bunch.
When you reply, I will see how to pay you. However, you will need to help me and ship them to a New York address at my own expense off course.
By he way what is the address where you are at the moment in case I can arrange for collection.
#19
Instructor
#20
Thank you.
Carlos.