90 ZR1 full build done and ready for burnouts
#1
90 ZR1 full build done and ready for burnouts
Complete build done by Panda Performance in Jacksonville, Fl
- 19x9.5 & 19x11 HRE P101s with a dark clear gloss
- 6piston zo6 front 4 piston zo6 rear brakes
- Vansteel adjustable coilovers all the way around
- Vansteel 35mm front sway bar 25.4mm rear sway bar
- Steelworks long tube cat delete headers
- Corsa catback exhaust
- Short throw shifter
- New plugs, injectors, gaskets, wires, intake.......
- Custom tune by Haibeck Automotive
- All New Interior carpet
- Braman red leather with black stitching seats
- Braman racing harnesses
- Harness bar
- 5% tint all the way around
- L.E.D headlights/foglights
- Kenwood DDX 9704s
- Momo shift ****
- NRG steering wheel
- 19x9.5 & 19x11 HRE P101s with a dark clear gloss
- 6piston zo6 front 4 piston zo6 rear brakes
- Vansteel adjustable coilovers all the way around
- Vansteel 35mm front sway bar 25.4mm rear sway bar
- Steelworks long tube cat delete headers
- Corsa catback exhaust
- Short throw shifter
- New plugs, injectors, gaskets, wires, intake.......
- Custom tune by Haibeck Automotive
- All New Interior carpet
- Braman red leather with black stitching seats
- Braman racing harnesses
- Harness bar
- 5% tint all the way around
- L.E.D headlights/foglights
- Kenwood DDX 9704s
- Momo shift ****
- NRG steering wheel
The following users liked this post:
ucfchris84 (08-27-2018)
#3
HRE P101's on a C4?! That's amazing. I wouldn't be surprised if you were the only one in the world.
Did you purchase these new or secondhand?
Did you purchase these new or secondhand?
The following users liked this post:
ucfchris84 (08-27-2018)
#5
The following users liked this post:
ucfchris84 (08-27-2018)
The following users liked this post:
ucfchris84 (08-27-2018)
#8
Race Director
Member Since: Feb 2002
Location: Compound in the Grove, Ga.
Posts: 11,328
Received 910 Likes
on
583 Posts
2020 C3 of the Year Finalist - Unmodified
2019 C4 of Year Finalist (performance mods)
2018 C4 of Year Finalist
2015 C4 of the Year Finalist
St. Jude Donor '16
2020 C3 of the Year Finalist - Unmodified
Very nice. I would say outstanding.
The following users liked this post:
ucfchris84 (08-27-2018)
#9
Safety Car
Looks awesome!!!
The following users liked this post:
ucfchris84 (08-27-2018)
#10
Racer
Wheels look great! Do you have more pictures from different angles you can post?
The following users liked this post:
ucfchris84 (08-27-2018)
The following users liked this post:
ucfchris84 (08-27-2018)
The following users liked this post:
ucfchris84 (08-27-2018)
#14
Le Mans Master
Member Since: Mar 2001
Location: Omaha
Posts: 6,591
Received 2,273 Likes
on
1,191 Posts
2020 Corvette of the Year Finalist (performance mods)
C4 of Year Winner (performance mods) 2019
Very nice!
What seats are those and did you have any issues fitting them?
What seats are those and did you have any issues fitting them?
The following users liked this post:
ucfchris84 (08-28-2018)
The following users liked this post:
ucfchris84 (08-30-2018)
#16
Braman red leather with black stitching seats. They barley fit by a fraction of an inch and thats not an exaggeration. They had to be bolted to the floor with no forward and reverse adjustment so anyone who isnt my height cant really drive the car.. I'm ok with that .
The following users liked this post:
ucfchris84 (08-28-2018)
The following users liked this post:
ucfchris84 (08-28-2018)
#19
Direct bolt on. One company makes the front kit another makes the rear I would have to go back and find out where I ordered those from. The c6 calipers and disks took a few months to source. No ebrake but I live in flat country so I'm ok with it.
The following users liked this post:
ucfchris84 (08-30-2018)