Forgelines and Carbon ZR-1 brakes
The following users liked this post:
1993C4LT1 (01-26-2019)
The following 3 users liked this post by 1LEZ:
#3
Burning Brakes
Those look like carbon ceramic rotors. Must have cost a fortune! But looks great and surely must work great too.
Was the brake master cylinder modified also? If so, mind sharing?
Was the brake master cylinder modified also? If so, mind sharing?
#7
I haven't made any master cylinder changes. It seems to work fine with the set-up. I know the later model C4 ZR-1s had a slightly larger piston in the master cylinder. I may upgrade at some point just to see. Car performs great. I made buddy nauseous standing on the brakes from a 25-0 test
#8
Le Mans Master
I have the C6 Z06 brakes all around mine. Its a 92 and absolutely no issues w the master being inadequate. When u have this level of braking power, I have rarely if ever needed to stand on them. If anything I end up stopping sooner than I thought I would.
#9
Race Director
What had to be done to mount the rotors? Adapter to the OEM knuckle mounting points?
looks like the the front wheels are convex and rear concave (centers)
also so what size wheel tire combo are you running?
looks like the the front wheels are convex and rear concave (centers)
also so what size wheel tire combo are you running?
#14
Le Mans Master
Member Since: Jan 2000
Location: Georgetown TX
Posts: 8,435
Received 1,870 Likes
on
1,085 Posts
C5 of Year Finalist (appearance mods) 2019
Due to the size of those calipers and the wheel offset required to fit over them, there's not enough room for much more than a 1" lip on the front wheels.
#16
Safety Car
Member Since: Mar 2005
Location: Fredonia WI
Posts: 3,566
Received 491 Likes
on
392 Posts
2023 C4 of the Year Finalist- Modified
Finalist 2020 C4 of the Year - Modified
C4 of Year Finalist (performance mods) 2019
2018 C4 of Year Finalist
Very nice. I bet they do haul the Z down quickly
#18
I used the adapters for the C6 Z06 kit but the calipers had to be milled to allow the adapter to lay flat against it. The front wheels are shallow concave and the rears are deep. Tires are 275/30/19 front and 325/30/19 rear
The following users liked this post:
-=Jeff=- (01-29-2019)
#20
I don't plan on giving any wheels specs because if you're going to order a custom wheel for your car you would be wise to take your own measurements. The car has Callaway coilovers and the ride height has been adjusted