Rob 93ZR-1

Looking to put a 150 shot on my car in the near future. I'm going to try and hide everything under the plenum as all the vacuum stuff has been removed. PM me with what you have.

I need to pull the plenum to change out my AC compressor and would like to plumb this in at the same time even if I don't finish the NOS right away.

Thanks
Rob

Rkreigh

kurt was selling his direct port nitrous kit on ebay a while back.

it's blown up a few 415s

Crabs

Kurt had a set of plates made that go between the plenum and the injector housings.
https://www.ebay.com/itm/90-95-Corve...cAAOSwfwFcbVNC
They've been on eBay for years and years.
There might be fitment problems between the plenum and the hood with these plates installed.

'Crabs

pushrod-v8

This is your best option for a new kit.

https://www.summitracing.com/int/par...make/chevrolet

Rkreigh

also be advised of the fitment issues when pieces of the plenum shoot through the hood

DRM500RUBYZR-1

Marty