F/S: 1996 Corvette Coupe Auto (modified)
#1
Safety Car
Thread Starter
Member Since: Dec 2007
Location: Sandhills of North Carolina
Posts: 3,616
Likes: 0
Received 5 Likes
on
4 Posts
F/S: 1996 Corvette Coupe Auto (modified)
MUST SELL SOON! MAKE ME A REASONABLE OFFER ON IT!!!
I've lost interest in my car so it's time to let it go. I've done several mods to it including 226/230/595/595/111lsa Bullet cam, AFR 195 Street Eliminator heads, Edelbrock intake, Installed a Dana 44 3:45 rear end, MSD opti,LS7 lifters, hardened push rods. 1.7 roller rockers, TPIS 1-3/4" long tube headers. 2800 stall converter (Pete's) Lots of bolt ons also. Mileage is 101K but it's strong and uses next to no oil. No leaks anywhere. Always had Moblie one as far as I know. I'm the third owner and it has a clean Carfax report. Body is in very good shape with a few small scratches. Leather seats are showing their age but no gouges or tears. AC doesn't work but all the pieces and parts are there. Cd player is out but the radio is ok. My plans for it were to continue on with the bottom end in the form of a 383 but I lost interest in the car. Asking $7,000.00 cash. There are more pictures and info in my profile. Located in Aberdeen NC. PM me with any questions.
I've lost interest in my car so it's time to let it go. I've done several mods to it including 226/230/595/595/111lsa Bullet cam, AFR 195 Street Eliminator heads, Edelbrock intake, Installed a Dana 44 3:45 rear end, MSD opti,LS7 lifters, hardened push rods. 1.7 roller rockers, TPIS 1-3/4" long tube headers. 2800 stall converter (Pete's) Lots of bolt ons also. Mileage is 101K but it's strong and uses next to no oil. No leaks anywhere. Always had Moblie one as far as I know. I'm the third owner and it has a clean Carfax report. Body is in very good shape with a few small scratches. Leather seats are showing their age but no gouges or tears. AC doesn't work but all the pieces and parts are there. Cd player is out but the radio is ok. My plans for it were to continue on with the bottom end in the form of a 383 but I lost interest in the car. Asking $7,000.00 cash. There are more pictures and info in my profile. Located in Aberdeen NC. PM me with any questions.
Last edited by Weav's Vet; 12-22-2013 at 01:22 PM.
#4
Burning Brakes
Are those Nexen 3000 tires on there? If so, how do you like them? I just had some put on my 91 convertible. I notice they are much quieter than my previous tires. Too early to notice anything else.
#6
Safety Car
Thread Starter
Member Since: Dec 2007
Location: Sandhills of North Carolina
Posts: 3,616
Likes: 0
Received 5 Likes
on
4 Posts
A few more mods are: high volume fuel pump, adjustable fpr, MSD plug wires, Meziere electric water pump, new radiator and hoses, C- beam plates, Shocks probably have 10k miles on them, double roller timing chain, TPIS long tube headers,58 mm Performance Products throttle body, Bosch III injectors (36's I think), DMH electric cutouts if you didn't watch the vid, X pipe, high flow cats, speed bleaders, stainless brake lines, Up graded spring in the master cylinder for better braking on the rear. The car has been lowered. 4 wheel alighnment last year and I doubt there are 200 miles on it. Just had NC inspection in Aug.
Last edited by Weav's Vet; 10-29-2013 at 12:01 PM.
#11
Burning Brakes
Member Since: Mar 2012
Location: California
Posts: 751
Likes: 0
Received 18 Likes
on
13 Posts
FL Events Coordinator
St. Jude Donor'13
I love the sound of the exhaust. May I ask where you got those cutouts and which ones? I have been looking for some for my 89 corvette and think they would sound great.
Very nice car and hope you have good luck with selling. If I didn't have mine then I would buy this.
Very nice car and hope you have good luck with selling. If I didn't have mine then I would buy this.
#12
Safety Car
Thread Starter
Member Since: Dec 2007
Location: Sandhills of North Carolina
Posts: 3,616
Likes: 0
Received 5 Likes
on
4 Posts
I love the sound of the exhaust. May I ask where you got those cutouts and which ones? I have been looking for some for my 89 corvette and think they would sound great.
Very nice car and hope you have good luck with selling. If I didn't have mine then I would buy this.
Very nice car and hope you have good luck with selling. If I didn't have mine then I would buy this.
They are DMH 3". I can't recall the website I bought them from, sorry. They're a lot of fun to play with. If you just barely crack them open they give the car a nice raspy sound which I like a lot. I put the control button just in front of the center console storage compartment.
#13
Safety Car
Thread Starter
Member Since: Dec 2007
Location: Sandhills of North Carolina
Posts: 3,616
Likes: 0
Received 5 Likes
on
4 Posts
As a bonus to whoever ends up with this car I will offer my tuning software (Jet DST), laptop, Innovate wide band O2, and data logging software for $500.00. It's everything needed to adjust the tune yourself, or download it from your favorite tuner then install it. You can data log the tune and send the results right back to him for any further adjustments. Sorry, this isn't for sale separately. Also both service manuals are included with it.
Last edited by Weav's Vet; 10-19-2013 at 11:51 PM.
#14
Burning Brakes
Member Since: Mar 2012
Location: California
Posts: 751
Likes: 0
Received 18 Likes
on
13 Posts
FL Events Coordinator
St. Jude Donor'13
Thanks!
They are DMH 3". I can't recall the website I bought them from, sorry. They're a lot of fun to play with. If you just barely crack them open they give the car a nice raspy sound which I like a lot. I put the control button just in front of the center console storage compartment.
They are DMH 3". I can't recall the website I bought them from, sorry. They're a lot of fun to play with. If you just barely crack them open they give the car a nice raspy sound which I like a lot. I put the control button just in front of the center console storage compartment.
Thank you very much for sharing the info.
#15
Safety Car
Thread Starter
Member Since: Dec 2007
Location: Sandhills of North Carolina
Posts: 3,616
Likes: 0
Received 5 Likes
on
4 Posts
Thanks, I have a custom exhaust I made for it that has no drone and it quiet-ish. I am going to get these so I can make it louder when I feel like it. I'll probably mount the button inside the center console next to the hatch release button. Do you have 2 of them or just 1?
Thank you very much for sharing the info.
Thank you very much for sharing the info.
#16
Safety Car
Thread Starter
Member Since: Dec 2007
Location: Sandhills of North Carolina
Posts: 3,616
Likes: 0
Received 5 Likes
on
4 Posts
With almost 700 views and very little interest I'm thinking either I'm way to high on price or there just isn't very much interest in C4's or modified ones anyway so I'm knocking 500.00 off the price down to $8500.00. If you guys know of anyone that might be interested in this car please send them my way, I really need to sell it. I also have an ad on Autotrader just type in zip 28315. Thanks!
#20
Instructor
Member Since: Jul 2013
Location: Hoxie Kansas
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
wow I was sure this would have sold by now. If you where close to me Iwould come check it out. I really like the wheels. Car sounds great.
Do know why the AC does not work?
How is the weather stripping?
good luck surely someone need a excellent Christmas present
Do know why the AC does not work?
How is the weather stripping?
good luck surely someone need a excellent Christmas present