FS: 1996 LT4 White 95k miles
#1
Advanced
Thread Starter
1996 LT4 White 95k miles
Selling my Vette, Owned since December 2010. Rebuilt the motor in 2011 at 75k miles with a cam from Lloyd Elliott. I am on orders to PCS in August. Car is in Bainbridge, Ohio. Had head, and intake done by Advanced Inductions last year and put on the long tubes at around 94k miles.
-1996 Coupe
-White with Tan interior
-98,000 miles
-American Racing Headers long system 1-3/4" primaries into 3" duals. No cats or emissions (still have the old exhaust with Borla mufflers)
-LT4/6 speed with a clutch from Southbend
-Advanced inductions Performance Rebuild on the heads added PSI LS1511 beehive springs
-Advanced inductions Street/Strip ported intake
-226/232 .574/.570 110 LSA cam from Lloyd Elliott
-Comp Cams 1618-16 Ultra Pro Magnum Rocker Arms
-Comp Cams 4502-16 3/8" Rocker Stud
-Trick flow TFS-21407200 chromoly pushrods
-Two tops; white and tinted
-Comes with a cover
-Garaged kept
-I had it dyno'ed after the cam install but before the headers and head/intake work and it dyno'ed 341 whp @6500 rpm, and 314 wtq @4500
-$8,000
the Bad
-Transmission grinds going into second if you aren't shifting slow
-The interior needs the seats recovered and new carpet. There is also some of the finish coming off of the center console. Other than that the interior is in good shape
-Cruise control doesn't work
-PKE doesn't work
-The chrome is flaking off of the rims, and one center cap is missing on the Driver front rim
-Front tires (275/40/17) have about 50% left, Rears (315/35/17)need replaced. They are Nitto NT555s
-AC needs recharged
-1996 Coupe
-White with Tan interior
-98,000 miles
-American Racing Headers long system 1-3/4" primaries into 3" duals. No cats or emissions (still have the old exhaust with Borla mufflers)
-LT4/6 speed with a clutch from Southbend
-Advanced inductions Performance Rebuild on the heads added PSI LS1511 beehive springs
-Advanced inductions Street/Strip ported intake
-226/232 .574/.570 110 LSA cam from Lloyd Elliott
-Comp Cams 1618-16 Ultra Pro Magnum Rocker Arms
-Comp Cams 4502-16 3/8" Rocker Stud
-Trick flow TFS-21407200 chromoly pushrods
-Two tops; white and tinted
-Comes with a cover
-Garaged kept
-I had it dyno'ed after the cam install but before the headers and head/intake work and it dyno'ed 341 whp @6500 rpm, and 314 wtq @4500
-$8,000
the Bad
-Transmission grinds going into second if you aren't shifting slow
-The interior needs the seats recovered and new carpet. There is also some of the finish coming off of the center console. Other than that the interior is in good shape
-Cruise control doesn't work
-PKE doesn't work
-The chrome is flaking off of the rims, and one center cap is missing on the Driver front rim
-Front tires (275/40/17) have about 50% left, Rears (315/35/17)need replaced. They are Nitto NT555s
-AC needs recharged
Last edited by vetteson; 11-06-2017 at 11:40 AM.
#7
Advanced
Thread Starter
Dropping the price to $8,000, only because I am doing a stroker in my Cherokee and then I will start focusing on fixing issues with the Vette. Mileage is up to 98k now with the drive down to Georgia.
#9
Intermediate
#16
Advanced