FS: 1992 C4 383 LT4 6 spd
#1
1992 C4 383 LT4 6 spd
1992 Corvette
383 LT4
Scat superlight forged crank 3.750 stroke, 5.7 rodlength
Manley Sportsmaster I-beam rods
Diamond forged pistons 4.030" -11cc
CNC ported LT4 heads
Lunati Dual springs & titanium retainers
TPIS 700-701 solid roller cam
LT4 intake
58mm TPIS throttle body
TPIS cold air induction
TPIS 7 qt oil pan
ATI Super Damper
Electric water pump
Spec Stage 3 clutch w/ Aluminum flywheel
Ceramic coated headers, dual 3" exhaust withX-pipe, Magnaflow mufflers
MSD 6A Ignition
Hurst Shifter
Dana 44 diff with 4.10 gears
Powerstop brakes
ZR1 wheels 17x9.5, 17x11 (tires need replacing)
430 hp / 400 ft/lbs on DynoJet chassis dyno
comes with 2 black seats in very good condition
Body is straight, no evidence of any collision repairs.
I bought this car with no reverse. It runs anddrives beautifully forward. I removed the transmission and separated thecase to inspect. It has a cracked reverse gear. The transmission (not currently in the car) is a black tag ZF s6-40. The clutch and pressure plate was on the floor of my garage when I got acouple inches of water in the floor, so it will need to be resurfaced. I havea stack of detailed receipts, and a chassis dyno sheet from theprevious owner who built the engine. I have run out of time andmoney to put it back together. If It does not sell complete, I am goingto part it out. I know the value of the parts.
Located in New Orleans, LA.
If you are interested in parts, let me know.
[FONT=Verdana]
383 LT4
Scat superlight forged crank 3.750 stroke, 5.7 rodlength
Manley Sportsmaster I-beam rods
Diamond forged pistons 4.030" -11cc
CNC ported LT4 heads
Lunati Dual springs & titanium retainers
TPIS 700-701 solid roller cam
LT4 intake
58mm TPIS throttle body
TPIS cold air induction
TPIS 7 qt oil pan
ATI Super Damper
Electric water pump
Spec Stage 3 clutch w/ Aluminum flywheel
Ceramic coated headers, dual 3" exhaust withX-pipe, Magnaflow mufflers
MSD 6A Ignition
Hurst Shifter
Dana 44 diff with 4.10 gears
Powerstop brakes
ZR1 wheels 17x9.5, 17x11 (tires need replacing)
430 hp / 400 ft/lbs on DynoJet chassis dyno
comes with 2 black seats in very good condition
Body is straight, no evidence of any collision repairs.
I bought this car with no reverse. It runs anddrives beautifully forward. I removed the transmission and separated thecase to inspect. It has a cracked reverse gear. The transmission (not currently in the car) is a black tag ZF s6-40. The clutch and pressure plate was on the floor of my garage when I got acouple inches of water in the floor, so it will need to be resurfaced. I havea stack of detailed receipts, and a chassis dyno sheet from theprevious owner who built the engine. I have run out of time andmoney to put it back together. If It does not sell complete, I am goingto part it out. I know the value of the parts.
Located in New Orleans, LA.
If you are interested in parts, let me know.
[FONT=Verdana]
Last edited by K5Chris; 08-02-2017 at 04:05 PM.
#6
I have someone interested in the whole car. I would rather not have to spend any more time taking it apart. I will let you know if I do end up parting it out. the engine/exhaust sounds mean as hell. I wish I would have gotten a video of it.
Last edited by K5Chris; 05-11-2017 at 11:03 PM.