FS: 1994 Corvette Race Car
12-14-2017, 01:03 AM
#1
4th Gear
Thread Starter
Member Since: Dec 2017
Location: Wisconsin
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
1994 Corvette Race Car--16,000 BOO (Trades)
Former SCCA Corvette Challenge Car Totally set up and race ready—fast, very reliableAll Logbooks & Receipts—SCCA & Midwestern Council
Motor Specs:
LT-1 Bock bored to 383 cu in Professionally built by Speed Performance in Wauconda, IL (Have all receipts) Eagle Mfg/LT-1 competition engine kit with forged steel rods & crank 10.5 to 1 compression aluminum pistons.
Aluminum LT-1 head
Oversized stainless-steel valvesDouble Springs, roller lifters, H.D. pushrods, guides & seals Adjustable fuel pressure regulator
Acell 300+ high voltage ignition system with REV limiter
Opti spark distributor with high capacity wires and plugs
Hooker competition headers with custom 3” exhaust
OB2 ECM/reflashed for engine mods
8qt baffled road race oil pan
New Setrab oil cooler with stainless steel linesPressurized Accu Sump oil system H.D. water pump and radiator with added capacity and dual electric fans
Transmission/Suspension/Brakes:
ZF 6-Speed transmission
Quarter Master 7” triple disc racing clutch set up
Dana 44 diff with 3:73 gears and vented cooling line Vette Brake mfr. Heim jointed and adjustable control bars, struts, tie rods, links, sway bars and bushingsCoil over suspension with 500 lbs. springs and Bilstein adjustable shocksColeman Grand National 4 Disc front brakes with 2-Piece 13.5” rotors Performance Friction race compound pads
Tires/Wheels:
2 Sets of Rims—Silver 17” ZR-1 Aluminum wheels (9.5 front, 11.0 rears) with Hoosier A6 tires with 3 heat cycles—ran one race weekend—Stored away in plastic bags1 set of Corvette Grand Sport rims with older Hoosier A6 Slicks (On Car in garage)
Safety:
Auto Power roll cage with driver side door bar and center Petty bar 2 Seats—Butler race seat (installed), Momo support bucket seat with brace (Included) New 6-point harness with Window net
Firebottle Halon extinguisher system
New Optima battery in venter box with Kill switch
ATL 20 Gallon fuel cell mounted in rear crash carrier
Lexan windows with safety bars
Other:
Large AutoMeter memory tach with shift light
AMB transponder lap counter
Lots of spare parts
All SCCA and Midwestern Council Logbooks
Call Ben at (414) 659-9210 or Benjamin.Holzem@gmail.com
$16,000 OBO
*TRADES CONSIDERED--Classic Road Cars (Corvette, British, Classic American Cars, ect)
Motor Specs:
LT-1 Bock bored to 383 cu in Professionally built by Speed Performance in Wauconda, IL (Have all receipts) Eagle Mfg/LT-1 competition engine kit with forged steel rods & crank 10.5 to 1 compression aluminum pistons.
Aluminum LT-1 head
Oversized stainless-steel valvesDouble Springs, roller lifters, H.D. pushrods, guides & seals Adjustable fuel pressure regulator
Acell 300+ high voltage ignition system with REV limiter
Opti spark distributor with high capacity wires and plugs
Hooker competition headers with custom 3” exhaust
OB2 ECM/reflashed for engine mods
8qt baffled road race oil pan
New Setrab oil cooler with stainless steel linesPressurized Accu Sump oil system H.D. water pump and radiator with added capacity and dual electric fans
Transmission/Suspension/Brakes:
ZF 6-Speed transmission
Quarter Master 7” triple disc racing clutch set up
Dana 44 diff with 3:73 gears and vented cooling line Vette Brake mfr. Heim jointed and adjustable control bars, struts, tie rods, links, sway bars and bushingsCoil over suspension with 500 lbs. springs and Bilstein adjustable shocksColeman Grand National 4 Disc front brakes with 2-Piece 13.5” rotors Performance Friction race compound pads
Tires/Wheels:
2 Sets of Rims—Silver 17” ZR-1 Aluminum wheels (9.5 front, 11.0 rears) with Hoosier A6 tires with 3 heat cycles—ran one race weekend—Stored away in plastic bags1 set of Corvette Grand Sport rims with older Hoosier A6 Slicks (On Car in garage)
Safety:
Auto Power roll cage with driver side door bar and center Petty bar 2 Seats—Butler race seat (installed), Momo support bucket seat with brace (Included) New 6-point harness with Window net
Firebottle Halon extinguisher system
New Optima battery in venter box with Kill switch
ATL 20 Gallon fuel cell mounted in rear crash carrier
Lexan windows with safety bars
Other:
Large AutoMeter memory tach with shift light
AMB transponder lap counter
Lots of spare parts
All SCCA and Midwestern Council Logbooks
Call Ben at (414) 659-9210 or Benjamin.Holzem@gmail.com
$16,000 OBO
*TRADES CONSIDERED--Classic Road Cars (Corvette, British, Classic American Cars, ect)
Last edited by BenHolzem; 12-16-2017 at 12:17 AM. Reason: Add price
