When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If you are looking for a highly modified 96 C4 this car is for you. Save time and money from buying a stock C4 and and fixing it up to this level.and as fast.. Unless you really like doing all that work yourself then go that route. This Vette has many mods here are a few Melrose headers Comp Cam 280 xfi . LTCC one coil per cylinder High stall converter 3000 rpm. 3.73 rear end gears, Nitto N555 extreme street drag radials, Sniper nitrous system with rpm switch, Engine was just rebuilt with new 500 HP bottom end. Its has 36# injectors and has been tuned . The best ET 1/4 mile is 11.85 sec at 116 mph. Its only been dragged race two times since engine rebuilt. The cam is choppy and the exhaust is loud but when you put the throttle to the floor you better be ready to handle it because its not for those weak at heart.
The car can be seen on Craigslist just look for 1996 Corvette on Springfield Mo listing. You can see the building and racing of the car on you tube just search dxn1999 priced for a quick sell $12500 If interest call for more info.you can get my phone number from the Craigslist ad almost forgot car has 75k miles ad everything works including the a/c and upgraded stereo system. also no cats so if you live in a smog checking state you will have to deal with that. I built the car my self it was tuned by Solomon at lt1pcmtuning.com
Last edited by Sabre34; 05-26-2021 at 08:29 AM.
Reason: Sold
Dana 36 rebuilt with all new bearing and seals with 3.73 gears also have a spare rear end with 3.07 gears. Auto Trans is stock with a Edge Racing Converter 3k rpm stall.
With a 100HP shot of nitrous 11.85 sec 1/4 mile at 116 mph . Track was prepped but not that good second run was 12,01 with tire spin all the way thru 1st gear. 60 ft times dropped from 1.82 to 1.97.Im using Nitto NT555R street drag radials 315x35-17. They hook good if the track is prepped good Slick would be better but with a dana 36 it would be risky.. without nitrous about a sec more in the 1/4. Nitrous has window rpm switch that comes on between 3200 and 6200 rpm. The converter has a 3k rpm stall. it launches hard with the 3k rpm stall and 3.73 gears it launches really hard with nitrous. Ozark Raceway Park doesn't use the really sticky stuff on their track no need to tape the quarters. You can only run 1/4 mile if you are over 11.5.sec.. faster than that you have to run 1/8 mile only. There is a video on you tube of the two runs just search dxn1999 to see it.
Last edited by dxn1999; 04-22-2021 at 12:04 PM.
Reason: add jpg
03-31-2021, 05:24 PM
SOLD!! F/S 1996 CE LT1 Auto 11.85 sec 1/4 mile ET
