FS 2004 Z06 Commemorative 531RWHP/522RWTQ
10-11-2011, 07:58 PM
#1
Instructor
Thread Starter
Member Since: Jan 2009
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
FS 2004 Z06 Commemorative 531RWHP/522RWTQ
Hello Everyone,
I am listing my 2004 Corvette Z06 Commemorative #1351 for sale. The car currently has 17,xxx miles on it. I am the second owner of the car. I have the original window sticker and build sheet with the car. The car was bone stock when I bought it. Vengeance Racing has performed all of the modifications listed below. I built the car for fun and to show. The car has never been driven in rain and has never been smoked in. Interior/exterior is a 9 out of 10
The car made 531 RWHP and 522 RWTQ through 3.73 gears/full exhaust and drives INCREDIBLY well. Kelly Blue Book for a stock 2004 Z06 Commemorative is $27,000. I am asking $38,500. As you can see from the list below, I spared no expense. All the parts are the best of the best. You could not come close to building this car for what I am asking. The car is super clean as you can see from the photos. The car has never received anything less than a 2nd place trophy at any of the car shows. I can email more pictures upon request. Any questions on the motor/drivetrain, you can call Ron at Vengeance Racing or you can reach me at 404-242-7552.
I will consider reasonable offers, but I am not going to take $30,000 for the car. I will sell the car without the Forgeline wheels for $35,000. I understand that everyone has to work within a budget, but I can not give the car away. Kelly Blue Book value for my car stock is $27,000. At $35,000 (without the Forgeline wheels), that is $8,000 more than Kelly Blue Book.
Modifications:
Engine
LS402
Block- GM LS2
Crankshaft- Lunati King Crank 4"
Rods- Eagle 6.125
Piston- Wiseco -8cc Reverse Dome
Rings- Wiseco 4005 HF
Main Bearings- Clevite 77
Rod Bearings- Clevite 77
Camshaft- Vengeance Racing Vindicator 240/244 .605/.596 112 LSA
Cam Bearing- Durabond
Timing Set- IWIS Severe Duty
Oil Pump- Melling Hi Volume
Lifters- Comp 850-16
Push Rods- TFS 7.500
Rockers- Yella Terra 1.7
Heads- Trick Flow CNC 215cc
Intake Valves- 2.04
Exhaust Valves- 1.57
Springs- TFS/TEA .650 Dual Spring
Combustion Chambers- 59cc
ARP Head Studs
Compression- 11.35:1
Injectors- 42lb
Induction:
Intake- FAST 92 Ported Inlet and Port Matched Runners/Custom Paint Match
Throttle Body- Nick Williams Billet 96mm
Air Intake- Black Wing
Air Intake- Breathless Performance Air Bridge
Exhaust:
Kooks 1 7/8 Stainless Longtube Headers and X pipe
Bassani Stainless Catback Exhaust 5797Q5SC
Abear Custom Valve Covers- Fully Polished
FAST Fuel Rails
Suspension
Pfadt Race Engineering Coil Overs
Pfadt Race Engineering Street Sway Bars
Pfadt Race Engineering Transmission Mount
Drivetrain
Textrailla OZ700 clutch
GM Slave Cylinder
MGW Shifter with C6 **** and Boot
RPM Transmissions Stage II Differential w/3.73
Brakes:
BEAR Cross Drilled and Slotted Rotors
Carbotech Brake Pads
Carbon Fiber Brake Ducts
Interior:
Corbeau Race Seats and Seat Post
Auto Meter Dual Pod with Sport Comp 2 Gauges
Raptor Shift Light-
Everything above was professionally installed at Vengeance Racing.
Wheels/Tires-
Forgeline Wheels and Nitto tires
SP3P 19x10 front
SP3P 20x11.5 rear
Polished Center with Powder Clear Coat
Polished Lip
Powder Coated Inner Barrel
Titanium Hardware
Billet Polished Center Caps with Powder Clear and Paint Matched Ring
Nitto Invo Tires
275/30-19 Front
305/25-20 Rear
KBB
Dyno Graph:
A few videos
http://www.youtube.com/watch?v=5UNQd31UegQ
http://www.youtube.com/watch?v=ej2Ze...feature=relmfu
A few links featuring my car
http://www.vengeancerd.com/ then go to the Gallery/corvette/page #5
http://www.rpmtransmissions.com/cust...ustomers4.html
http://www.vetteweb.com/features/vem...6/viewall.html
http://www.yellaterra.com.au/your-ye...toIdentity=117
I am listing my 2004 Corvette Z06 Commemorative #1351 for sale. The car currently has 17,xxx miles on it. I am the second owner of the car. I have the original window sticker and build sheet with the car. The car was bone stock when I bought it. Vengeance Racing has performed all of the modifications listed below. I built the car for fun and to show. The car has never been driven in rain and has never been smoked in. Interior/exterior is a 9 out of 10
The car made 531 RWHP and 522 RWTQ through 3.73 gears/full exhaust and drives INCREDIBLY well. Kelly Blue Book for a stock 2004 Z06 Commemorative is $27,000. I am asking $38,500. As you can see from the list below, I spared no expense. All the parts are the best of the best. You could not come close to building this car for what I am asking. The car is super clean as you can see from the photos. The car has never received anything less than a 2nd place trophy at any of the car shows. I can email more pictures upon request. Any questions on the motor/drivetrain, you can call Ron at Vengeance Racing or you can reach me at 404-242-7552.
I will consider reasonable offers, but I am not going to take $30,000 for the car. I will sell the car without the Forgeline wheels for $35,000. I understand that everyone has to work within a budget, but I can not give the car away. Kelly Blue Book value for my car stock is $27,000. At $35,000 (without the Forgeline wheels), that is $8,000 more than Kelly Blue Book.
Modifications:
Engine
LS402
Block- GM LS2
Crankshaft- Lunati King Crank 4"
Rods- Eagle 6.125
Piston- Wiseco -8cc Reverse Dome
Rings- Wiseco 4005 HF
Main Bearings- Clevite 77
Rod Bearings- Clevite 77
Camshaft- Vengeance Racing Vindicator 240/244 .605/.596 112 LSA
Cam Bearing- Durabond
Timing Set- IWIS Severe Duty
Oil Pump- Melling Hi Volume
Lifters- Comp 850-16
Push Rods- TFS 7.500
Rockers- Yella Terra 1.7
Heads- Trick Flow CNC 215cc
Intake Valves- 2.04
Exhaust Valves- 1.57
Springs- TFS/TEA .650 Dual Spring
Combustion Chambers- 59cc
ARP Head Studs
Compression- 11.35:1
Injectors- 42lb
Induction:
Intake- FAST 92 Ported Inlet and Port Matched Runners/Custom Paint Match
Throttle Body- Nick Williams Billet 96mm
Air Intake- Black Wing
Air Intake- Breathless Performance Air Bridge
Exhaust:
Kooks 1 7/8 Stainless Longtube Headers and X pipe
Bassani Stainless Catback Exhaust 5797Q5SC
Abear Custom Valve Covers- Fully Polished
FAST Fuel Rails
Suspension
Pfadt Race Engineering Coil Overs
Pfadt Race Engineering Street Sway Bars
Pfadt Race Engineering Transmission Mount
Drivetrain
Textrailla OZ700 clutch
GM Slave Cylinder
MGW Shifter with C6 **** and Boot
RPM Transmissions Stage II Differential w/3.73
Brakes:
BEAR Cross Drilled and Slotted Rotors
Carbotech Brake Pads
Carbon Fiber Brake Ducts
Interior:
Corbeau Race Seats and Seat Post
Auto Meter Dual Pod with Sport Comp 2 Gauges
Raptor Shift Light-
Everything above was professionally installed at Vengeance Racing.
Wheels/Tires-
Forgeline Wheels and Nitto tires
SP3P 19x10 front
SP3P 20x11.5 rear
Polished Center with Powder Clear Coat
Polished Lip
Powder Coated Inner Barrel
Titanium Hardware
Billet Polished Center Caps with Powder Clear and Paint Matched Ring
Nitto Invo Tires
275/30-19 Front
305/25-20 Rear
KBB
Dyno Graph:
A few videos
http://www.youtube.com/watch?v=5UNQd31UegQ
http://www.youtube.com/watch?v=ej2Ze...feature=relmfu
A few links featuring my car
http://www.vengeancerd.com/ then go to the Gallery/corvette/page #5
http://www.rpmtransmissions.com/cust...ustomers4.html
http://www.vetteweb.com/features/vem...6/viewall.html
http://www.yellaterra.com.au/your-ye...toIdentity=117
Last edited by BADZOH6; 07-29-2012 at 04:50 PM.
for selling this thing!
10-19-2011, 01:41 PM
#9
Instructor
Thread Starter
Member Since: Jan 2009
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
The guages on the pillar are A/F and Nitrous. Nitrous has NEVER been on this car. There is also a Raptor shift light ontop of the gauge pod. In response, yes the motor can hold nitrous, but I never installed it.
10-28-2011, 02:13 PM
#12
Team Owner
I have seen the car in person and it as clean as it photographs 
That said I think it would sell quicker with some shots like the one in your avatar
That said I think it would sell quicker with some shots like the one in your avatar
