2001 z06 lq9, 610 hp procharged ccw 20kobo
07-11-2015, 11:43 AM
#1
Cruising
Thread Starter
Member Since: Jul 2014
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
2001 z06 lq9, 610 hp procharged ccw 20kobo
http://philadelphia.craigslist.org/cto/5113784856.html
I am listing my 2001 z06 corvette for sale. This has been over a year project for me The interior is in good shape. The shell has about 104k on it. The car currently makes 611hp and 533tq on 11-12 psi at 6700 rpm with a Procharger d1sc. I pieced the supercharger kit together to get the best of all the parts I felt you could get. Car runs mid 10s all day on 93 octane.
Mods to the car as follows.
2004 lq9 6.0 iron block engine
New radiator
New a/c condenser and lines (cold a/c)
br7ef spark plugs
ljms boost cam.
brain tooley 660 lift springs and ti. retainers
Hardened stock length push rods.
ls9 head gaskets
head studs
edelbrock victor jr. intake manifold. and fuel rails
6061.com elbow.
ls2 throttle body
fic 900cc high imp. injectors.
walbro 450 fuel pump
Return style fuel system with aeromotive regulator.
Taylor spark plug wires and summit racing boot covers.
arh. 2 in headers swain tech coated
arh x pipe
borla quad tip stinger axel back exhaust
Procharger d1sc polished with procharger bracket
A&A corvette intercooler with schroud
Custom jm fabrications upper intercooler pipe with procharger bov.
Mgw shifter
Act twin disc clutch rated for 925 tq.
Tick master cylinder and remote bleeder
RPM. level vi t56 transmission with 30 spline output shaft
BRAND NEW z06 rear built by RPM with micro polished 3.42 gears with c6 axel shaft and gears upgrade and pinion machined by rpm for the 30 spline output shaft.
Elite engineering trans tunnel plate.
Trans/diff brace
Pfadt control arm bearings in the rear lower control arms.
Drilled and slotted rotors front and rear.
C6 wheels for the street with BRAND NEW tires
CCW drag pack wheels and tires with almost new tires all the way around. The rears are mt e.t. street slicks.
Qa1 shocks all the way around along with koni shocks for the front for driving around on the street along with custom made afco rear coil overs.
Also comes with a painted to mach color bolt in roll bar (not installed)
Carbon fiber hood.
20k obo
I am listing my 2001 z06 corvette for sale. This has been over a year project for me The interior is in good shape. The shell has about 104k on it. The car currently makes 611hp and 533tq on 11-12 psi at 6700 rpm with a Procharger d1sc. I pieced the supercharger kit together to get the best of all the parts I felt you could get. Car runs mid 10s all day on 93 octane.
Mods to the car as follows.
2004 lq9 6.0 iron block engine
New radiator
New a/c condenser and lines (cold a/c)
br7ef spark plugs
ljms boost cam.
brain tooley 660 lift springs and ti. retainers
Hardened stock length push rods.
ls9 head gaskets
head studs
edelbrock victor jr. intake manifold. and fuel rails
6061.com elbow.
ls2 throttle body
fic 900cc high imp. injectors.
walbro 450 fuel pump
Return style fuel system with aeromotive regulator.
Taylor spark plug wires and summit racing boot covers.
arh. 2 in headers swain tech coated
arh x pipe
borla quad tip stinger axel back exhaust
Procharger d1sc polished with procharger bracket
A&A corvette intercooler with schroud
Custom jm fabrications upper intercooler pipe with procharger bov.
Mgw shifter
Act twin disc clutch rated for 925 tq.
Tick master cylinder and remote bleeder
RPM. level vi t56 transmission with 30 spline output shaft
BRAND NEW z06 rear built by RPM with micro polished 3.42 gears with c6 axel shaft and gears upgrade and pinion machined by rpm for the 30 spline output shaft.
Elite engineering trans tunnel plate.
Trans/diff brace
Pfadt control arm bearings in the rear lower control arms.
Drilled and slotted rotors front and rear.
C6 wheels for the street with BRAND NEW tires
CCW drag pack wheels and tires with almost new tires all the way around. The rears are mt e.t. street slicks.
Qa1 shocks all the way around along with koni shocks for the front for driving around on the street along with custom made afco rear coil overs.
Also comes with a painted to mach color bolt in roll bar (not installed)
Carbon fiber hood.
20k obo
08-08-2015, 10:32 AM
#4
Melting Slicks
