FS: Gauging interest in tastefully built NBM '01 Vert
05-27-2017, 03:37 PM
#1
Melting Slicks
Thread Starter
Gauging interest in tastefully built NBM '01 Vert
Price is $20k. Thanks, Jax
Hi all, JaxEagle here. Haven't been around in a while and the wife has finally worn me down to the point I have to gauge interest in selling my Blue Angel. I don't have a list price in mind as I have been away from CF long enough that I am not current on market prices (If you have a good idea of value but aren't interested in purchase I would still appreciate if you pm me your opinion.). Anyone who is interested in the car can pm or text 9049990125.
This car has 69,004 mi. and was purchased from its previous owner here on CF in 2011 in mostly stock form with 63k mi. So last 6 years have seen 6k miles and added the goodies. Bad ROI for me and great for you!
This car has so many extras I can't even begin to list them but I will go through the Corvette Garage with serious inquires and show all the extras like battery tender, silky slinky car cover in matching body color, lots of stuff.
This car has been treated like royalty and was professionally built by EFI Alchemy, known nationally for quality LS tech.
I have tons of pictures but won't bother posting all of them. Try these for starters. Some pictures may contain parts that have been swapped out so see current list of mods to answer. I will also do a full set of current photo and video with anyone interested.
https://goo.gl/photos/QqgrEDrt3BGbLbdD9
2001 Corvette Convertible (6 speed) Naturally Aspirated - Dynojet 454 RWHP
McLeod RST Clutch
Vararam SC-1 Cold Air Intake
FAST102 Intake Manifold
Nick Williams 102mm TB
Comp Cams cam; 228/228duration, .588/.588 lift on 112 LSA
Racetronix Fuel Pump
PRC 227 Cylinder Heads
FAST Precision Flow 36lb fuel injectors
XS Power 1 3/4 Primary Long Tube Headers
XS Power 2 1/2 Catted X-Pipe with titanium rear
Corsa Indy Pace Car Axleback Exhaust with Tigershark Tips
3.42 rear gear
General Mods:
C6 Z06 shocks, sway bars, and polyurethane bushings
TSW Nurburgring Rotary Forged Lightweight Wheels
Bridgestone Potenza S04 Pole Position Tires
Hawk HP pads
Fangs
Plated drilled/slotted rotors
New Stainless brake lines
Interior is fully and professionally Dynamatted plus full radiant barrier (for soundproofing and interior temperature)
Cam and springs by EFI Alchemy 228/228
Catch can
JL Audio (6) C3 speakers, JL Audio Amp, 10" JL Audio Subwoofer, Stealth box
Pioneer HU w IPod, Bluetooth, etc.
Brass headlight motor gears
Replaced hydrualic hood and trunk arms
Column lock bypass module (This is important for C5's bc it was a problem area)
Sylvania Silverstar Ultra bulbs
New water pump, belts, tensioners, pulleys, hoses, fluids
$600 in Huper Optik tint
Annodized Red steel engine oil cap
Powder Coated C6 Crystal Red Brake Calipers
Lloyd's Side Facing CORVETTE and Cross Flag Logo Floormats
RSD Snap Short Shifter
Custom Shifter ****
Custom Shifter Boot
Clear front corner LED lights
Eagle Eye LED Tail Lights
Southern Car Parts C5Tail Light Seals
McLeod RST Clutch
Maptech Headunit Mount with white LED Corvette logo
DJ Motorsports Leather C5 seat covers in light oak with black trim and embroidered C5 logo
Carbon Fiber Windshield Cowl by American Hydrocarbon
Leather Door Panels by Double D Mods
Tires:
Rear - Bridgestone S04 PP 305/30/19 new at 66,178
Front - Bridgestone S04 PP 275/35/18 new at 66,178
Belts:
Last done at 62,000. Next due at 98,000. (every 36k).
Engine Oil and Filter:
Due at 71,000 (every 2,000) or annual. Ranger Method Clutch Fluid swap at same time.
Battery:
Last done 7/15/16 at 69,000. Check at 3 yrs (7/15/19) and replace at not more than 5 years (7/15/21).
Gear Oil:
Last done at 59,000. Next due at 85,000 (36k).
Air Filter:
Due annually, Jan. 1.
Fuel Filter:
Last changed at 62,000. Due next at 98,000 (every 36k)
Engine Coolant:
1/2012
1/2015
Next due Jan. 1 2018 (every 3 years).
Transmission Fluid:
Last changed at 59,000. Next due at 95,000 (every 36k).
Techron:
Due 7/1/17 (every 6 months max)
Hi all, JaxEagle here. Haven't been around in a while and the wife has finally worn me down to the point I have to gauge interest in selling my Blue Angel. I don't have a list price in mind as I have been away from CF long enough that I am not current on market prices (If you have a good idea of value but aren't interested in purchase I would still appreciate if you pm me your opinion.). Anyone who is interested in the car can pm or text 9049990125.
This car has 69,004 mi. and was purchased from its previous owner here on CF in 2011 in mostly stock form with 63k mi. So last 6 years have seen 6k miles and added the goodies. Bad ROI for me and great for you!
This car has so many extras I can't even begin to list them but I will go through the Corvette Garage with serious inquires and show all the extras like battery tender, silky slinky car cover in matching body color, lots of stuff.
This car has been treated like royalty and was professionally built by EFI Alchemy, known nationally for quality LS tech.
I have tons of pictures but won't bother posting all of them. Try these for starters. Some pictures may contain parts that have been swapped out so see current list of mods to answer. I will also do a full set of current photo and video with anyone interested.
https://goo.gl/photos/QqgrEDrt3BGbLbdD9
2001 Corvette Convertible (6 speed) Naturally Aspirated - Dynojet 454 RWHP
McLeod RST Clutch
Vararam SC-1 Cold Air Intake
FAST102 Intake Manifold
Nick Williams 102mm TB
Comp Cams cam; 228/228duration, .588/.588 lift on 112 LSA
Racetronix Fuel Pump
PRC 227 Cylinder Heads
FAST Precision Flow 36lb fuel injectors
XS Power 1 3/4 Primary Long Tube Headers
XS Power 2 1/2 Catted X-Pipe with titanium rear
Corsa Indy Pace Car Axleback Exhaust with Tigershark Tips
3.42 rear gear
General Mods:
C6 Z06 shocks, sway bars, and polyurethane bushings
TSW Nurburgring Rotary Forged Lightweight Wheels
Bridgestone Potenza S04 Pole Position Tires
Hawk HP pads
Fangs
Plated drilled/slotted rotors
New Stainless brake lines
Interior is fully and professionally Dynamatted plus full radiant barrier (for soundproofing and interior temperature)
Cam and springs by EFI Alchemy 228/228
Catch can
JL Audio (6) C3 speakers, JL Audio Amp, 10" JL Audio Subwoofer, Stealth box
Pioneer HU w IPod, Bluetooth, etc.
Brass headlight motor gears
Replaced hydrualic hood and trunk arms
Column lock bypass module (This is important for C5's bc it was a problem area)
Sylvania Silverstar Ultra bulbs
New water pump, belts, tensioners, pulleys, hoses, fluids
$600 in Huper Optik tint
Annodized Red steel engine oil cap
Powder Coated C6 Crystal Red Brake Calipers
Lloyd's Side Facing CORVETTE and Cross Flag Logo Floormats
RSD Snap Short Shifter
Custom Shifter ****
Custom Shifter Boot
Clear front corner LED lights
Eagle Eye LED Tail Lights
Southern Car Parts C5Tail Light Seals
McLeod RST Clutch
Maptech Headunit Mount with white LED Corvette logo
DJ Motorsports Leather C5 seat covers in light oak with black trim and embroidered C5 logo
Carbon Fiber Windshield Cowl by American Hydrocarbon
Leather Door Panels by Double D Mods
Tires:
Rear - Bridgestone S04 PP 305/30/19 new at 66,178
Front - Bridgestone S04 PP 275/35/18 new at 66,178
Belts:
Last done at 62,000. Next due at 98,000. (every 36k).
Engine Oil and Filter:
Due at 71,000 (every 2,000) or annual. Ranger Method Clutch Fluid swap at same time.
Battery:
Last done 7/15/16 at 69,000. Check at 3 yrs (7/15/19) and replace at not more than 5 years (7/15/21).
Gear Oil:
Last done at 59,000. Next due at 85,000 (36k).
Air Filter:
Due annually, Jan. 1.
Fuel Filter:
Last changed at 62,000. Due next at 98,000 (every 36k)
Engine Coolant:
1/2012
1/2015
Next due Jan. 1 2018 (every 3 years).
Transmission Fluid:
Last changed at 59,000. Next due at 95,000 (every 36k).
Techron:
Due 7/1/17 (every 6 months max)
Last edited by JaxEagle; 05-29-2017 at 10:29 AM.
05-28-2017, 05:37 AM
#2
Le Mans Master
Member Since: Dec 2000
Location: munising MI USA
Posts: 5,761
Likes: 0
Received 47 Likes
on
45 Posts
very nice pics and a beautiful car. If it were mine id probably ask 20k. With that milage I don't know if youd get that strong of a price but in all reality the cars worth it.
05-29-2017, 12:13 AM
#4
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,571
Received 19,186 Likes
on
13,910 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
You cannot gauge interest in your car in a FS thread. Here is the forum rule:
Please revise your original post to include an asking price by 12 pm on 5/29/17 or this thread will be deleted. Thanks.
3. Best Offers & Gauging Interest
The forum will permit "OBO" or "serious offers" in a sale thread where a price has been stipulated.
We will not permit threads where no price is stated, and asks for open offers. Low ball offers that are clearly ridiculous in nature, will be considered a violation of the forum rule pertaining to "Interference in a for sale," thread:
http://forums.corvetteforum.com/show....php?t=1118176
Members are not permitted to "gauge interest," in their item for sale thread. Such threads will create an ebay type auction, and that is unacceptable. Sellers must create their thread with an asking price included.
Only forum vendors are permitted to gauge interest in their products.
**NOTE** Supporting vendors sometimes offer prices that are below that recommended by manufacturers, so we allow them to post threads without a price and to ask people to contact them by phone or PM for the price. We extend the same courtesy to our supporting dealers, even though in most cases it is advantageous for them to post a price.
The forum will permit "OBO" or "serious offers" in a sale thread where a price has been stipulated.
We will not permit threads where no price is stated, and asks for open offers. Low ball offers that are clearly ridiculous in nature, will be considered a violation of the forum rule pertaining to "Interference in a for sale," thread:
http://forums.corvetteforum.com/show....php?t=1118176
Members are not permitted to "gauge interest," in their item for sale thread. Such threads will create an ebay type auction, and that is unacceptable. Sellers must create their thread with an asking price included.
Only forum vendors are permitted to gauge interest in their products.
**NOTE** Supporting vendors sometimes offer prices that are below that recommended by manufacturers, so we allow them to post threads without a price and to ask people to contact them by phone or PM for the price. We extend the same courtesy to our supporting dealers, even though in most cases it is advantageous for them to post a price.
05-29-2017, 10:31 AM
#5
Melting Slicks
Thread Starter
