FS: Feeler: SHOW READY Arctic White 2000 FRC Tiger Shark

Reply Subscribe

Thread Tools

Search this Thread

05-28-2017, 02:52 PM

PhillyFly1039

Intermediate

Thread Starter

Member Since: Feb 2013

Posts: 38

Likes: 6

Received 3 Likes on 3 Posts

Feeler: SHOW READY Arctic White 2000 FRC Tiger Shark

Yes, this is Casey's FRC. I've had it for about three years with absolutely no issues. I've barely even driven the car. I'll let the pics speak for themselves - enjoy.

This Vette needs nothing! Ready to drive ANYWHERE! It has zero squeaks,
squeals, rattles, vibrations, etc. This is a very solid, very smooth
vehicle. I just did a fluid change on the entire car at 25k miles. Brand
new clutch, slave cylinder, and remote bleeder installed at 25k miles as
well. Also did the "leaky butt" fix while the drivetrain was out. This
car is good to go! No disappointments! Why have a show car with no go?
Or why have a race car with no bling? Get the best of both world's right
here!

This project was a top shelf build with the finest aftermarket parts
available for Corvettes. From the Tigershark kit, to iForged wheels, to
custom Corbeau seats, to hundreds of hours of body and paint work, NO
CORNERS WERE CUT TO BUILD THIS CAR. Well over $70,000 invested
since 2006. The entire car was disassembled last year for paint and
completely wet sanded and buffed before re-assembly. This is one of the
straightest Corvettes on the planet. Anyone who has even seen the car
can vouch for it. The car speaks for itself.

2000 Arctic White FRC Tiger Shark
37k Low Miles
Extensive Modifications (over $70k spent)
Great Street Manners
Impressive Horsepower (411rwhp)
NO ISSUES AT ALL!

Engine / Drivetrain / Underhood:
Halltech Stinger Intake System (Red)
Wilson / Fast 90 Intake Manifold
GM Parts LS6 Fuel Rail Covers
Ported 90mm LS2 Throttle Body
England Green “Monster” Cam
GM Parts LS7 Lifters
Texas Speed Hardened Chromemoly Pushrods (7.400”)
Patriot Dual Gold Springs / Locks / Retainers / Seals
Lingenfelter High Volume LS6 Oil Pump
GM Parts LS2 Timing Set
Hypertech 160 Degree Thermostat
GM Parts LS6 Coolant Crossover Pipe
LG Performance Pro Series Long Tube Headers
Corsa Pace Car Tigershark Cat-back
Polished Fuel Rail
Optima Red Top Battery
CEC Chrome Alternator
CEC Chrome Tensioner Pulley
CEC Chrome Billet Oil Cap
CEC Chrome Windshield Cowl Cover
Carbon Fiber Battery Box Cover
Carbon Fiber Radiator Fan Shroud
Carbon Fiber Front Bumper Flange Cover
GM Parts Z06 Calipers
Bendix Slotted / Crossdrilled Rotors
Hawk HP Semi-metallic Pads
Tuned by Ed Hutchins at The HP Factory (411 rwhp / 382 rwtq)

Exterior:
Starcraft Tigershark Front Bumper (w/ Fogs)
Starcraft Tigershark Chin Spoiler
Starcraft Tigershark Rear Bumper
MCM Carbon Fiber Hood (Exposed Center)
GM Parts European Tail Lights
Custom “Shaved” Body Side Molding
Custom “Shaved” Door Handles
Custom “Shaved” Radio Antenna
Custom Molded BPP Rear Brake Ducts
Black iForged Daytona Wheels (19/9.5 F and 20/11 R)
Falken FK452 Tires (265/30/19 F and 305/25/20 R)
Limo Tint (5%)
Custom “Blacked Out” Front Signal Lights
Lowered 1.5– 2 inches
PPG Arctic White Paint (Barry Moore @ Nanesmond Auto Body)

Interior:
Hurst Billet Pro Shifter
Hurst “Eight Ball” Shift ****
Custom Painted Interior Panels
White Face Gauges
Complete Red LED Conversion
Custom Compartment Divider
Upgraded BOSE Stereo
Lloyd’s Premium Floor Mats
RKSport Carbon Fiber Door Sills

I do not feel pushed to sell this car by any means. I'm simply getting excited about a new project and that would require me to sell this one first. I've owned the car for almost 3 years and have had ZERO problems. The car has NEVER broken down or EVER been to the dealership for repairs. Clean CARFAX, no accidents, no claims, and no lissues. Purchased 100% OEM in 2006 from Coffee's Corvettes and Classics in PA ( http://www.coffeescorvettes.com/display.php?ID=2 ). It has been garage kept since day one and has only seen rain a handful of times. RARELY WASHED WITH WATER (only detail spray). No disappointments! You will not find a cleaner C5!

Any questions, please don't hesitate to shoot me a PM. I also have a ton more pictures if you would like to see anything specific.

Price: $27,000 OBO (make me a reasonable offer, I'm ready to sell this and move on)
No, I will not part out anything.
__________________