*** ECS Paxton Supercharger - $7695 installed and tuned *** (Florida and SouthEast)
03-14-2007, 10:41 PM
#1
Supporting Tuner
Thread Starter
*** ECS Paxton Supercharger - $7695 installed and tuned *** (Florida and SouthEast)
*** ECS Paxton Supercharger - $7695 installed and tuned *** (Florida and SouthEast)
As some of you know, I have teamed up with East Coast Supercharging (ECS). What most of you do not know is I quit my high paying IT day job and will now be tuning full time!!!
As a result, I will be running a time limited Introductory Package for the South East;
ECS Paxton supercharger kit, installed and tuned for only $7695. This is for Florida and the SouthEast only.
This kit will make a safe and reliable 500rwhp all day long on an otherwise stock C5.
Unlike some other supercharger kits that require you to upgrade your head unit, the ECS Paxton system can grow with you.
This same kit, with some modifications (fuel system, 8rib pulleys, drivetrain), has made over 900rwhp, and run 9.33 @ 146mph in the quarter mile on a forged 402ci LS2 in a C5. It has huge potential for growth without having to change the head unit and keep your investment of over 75% of the kit.
The kit comes so complete, that only oil, oil filter and coolant are not included.
The ECS kit comes with a Paxton Novi 2000 supercharger, ECS custom brackets and pulleys, ECS custom intercooler and tubing, ECS custom lower radiator support, ECS custom restrictor plate, Racetronix fuel pump, Mototron 60lb injectors, 160 degree thermostat, Bosch BOV,– it even comes with 8 new TR6 plugs!!
So send me a PM, drop me an email, link up via AIM or give me a call. This offer for a limited time only, so act now! I accept credit cards.
Stephen Rawlins
Email: grond [at] englandgreen [dot] com
AIM: englandgreen04
PM me here
And who is this “EnglandGreen” guy??? Find out here
Here are some pictures of the ECS Paxton Supercharger kit in various stages of installation.
As some of you know, I have teamed up with East Coast Supercharging (ECS). What most of you do not know is I quit my high paying IT day job and will now be tuning full time!!!
As a result, I will be running a time limited Introductory Package for the South East;
ECS Paxton supercharger kit, installed and tuned for only $7695. This is for Florida and the SouthEast only.
This kit will make a safe and reliable 500rwhp all day long on an otherwise stock C5.
Unlike some other supercharger kits that require you to upgrade your head unit, the ECS Paxton system can grow with you.
This same kit, with some modifications (fuel system, 8rib pulleys, drivetrain), has made over 900rwhp, and run 9.33 @ 146mph in the quarter mile on a forged 402ci LS2 in a C5. It has huge potential for growth without having to change the head unit and keep your investment of over 75% of the kit.
The kit comes so complete, that only oil, oil filter and coolant are not included.
The ECS kit comes with a Paxton Novi 2000 supercharger, ECS custom brackets and pulleys, ECS custom intercooler and tubing, ECS custom lower radiator support, ECS custom restrictor plate, Racetronix fuel pump, Mototron 60lb injectors, 160 degree thermostat, Bosch BOV,– it even comes with 8 new TR6 plugs!!
So send me a PM, drop me an email, link up via AIM or give me a call. This offer for a limited time only, so act now! I accept credit cards.
Stephen Rawlins
Email: grond [at] englandgreen [dot] com
AIM: englandgreen04
PM me here
And who is this “EnglandGreen” guy??? Find out here
Here are some pictures of the ECS Paxton Supercharger kit in various stages of installation.
03-15-2007, 09:33 AM
#5
Supporting Tuner
Thread Starter
Thanks guys 
03-15-2007, 10:19 AM
#8
Racer
Member Since: Dec 2006
Location: Atlanta, GA
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Do you have any dyno sheets showing the powerband and power output at different stages?
For example; a dyno sheet on a stock motor, forged 346, built 402, with and without methanol, etc.
For example; a dyno sheet on a stock motor, forged 346, built 402, with and without methanol, etc.
03-15-2007, 10:53 AM
#10
Wow, what a great deal. The best price I had seen was $9,000 for parts and labor.
Stephen (EG) does a great work, for anyone who is on the edge, this is the time & place!
Go for it and let's support EG!
Stephen (EG) does a great work, for anyone who is on the edge, this is the time & place!
Go for it and let's support EG!
03-16-2007, 10:07 AM
#13
Supporting Tuner
Thread Starter
Probably not. 
But I accept credit cards, personal checks, cashiers checks and cash 
I do not, but ECS probably has this information. I will see what I can find
Answered your question over in C5 Tech 
http://forums.corvetteforum.com/show...5&postcount=13
Thanks for the support Ben. It was a pleasure working on your car - absolutely spotless inside and out
Thanks Doug
But I accept credit cards, personal checks, cashiers checks and cash http://forums.corvetteforum.com/show...5&postcount=13
Thanks Doug
03-16-2007, 11:10 AM
#14
Premium Supporting Vendor
Member Since: Jan 2001
Location: Central Jersey
Posts: 17,681
Likes: 0
Received 8 Likes
on
8 Posts
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
06 with our kit and a set of long tube headers. The second one is our SC800 package which is a forged 346 with our cam and a set od LS6 heads that we did in house and of course our Paxton kit. The third one is our SC900 which is based on our Forged 402. Any questions, let us know. 
__________________
Home of the Fastest Supercharged C5 8.4 @ 158mph
Home of the Fastest Supercharged IRS GTO 9.0@ 155
Home of the Fastest Supercharged C6 9.7 @ 143mph
Proud Sponsor of the ECS Corvette Challenge
http://www.corvettechallenge.info
609-752-0321
Home of the Fastest Supercharged C5 8.4 @ 158mph
Home of the Fastest Supercharged IRS GTO 9.0@ 155
Home of the Fastest Supercharged C6 9.7 @ 143mph
Proud Sponsor of the ECS Corvette Challenge
http://www.corvettechallenge.info
609-752-0321
03-16-2007, 02:12 PM
#15
Supporting Tuner
Thread Starter
^ Thanks for the hard data, Chris
03-17-2007, 09:01 AM
#16
Supporting Tuner
Thread Starter
Saturday Bump
03-19-2007, 11:06 AM
#17
Supporting Tuner
Thread Starter
03-20-2007, 02:21 PM
#18
Supporting Tuner
Thread Starter
03-21-2007, 09:33 AM
#19
Supporting Tuner
Thread Starter
ttt
