Lets talk about BOV's....Tial Q/50 and Big Red???
05-24-2011, 02:51 PM
#21
Pro
Member Since: Aug 2008
Location: Madison Ct.
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
I have a Novi and it is really quiet. I would like a louder BOV, but I don't know to much about them, so if you guys could give me some knowledge on them , that would be great! I want a loud one that sounds like a 747 taking off, what is the best one to go with, I know the Big Reds are over $400 and Tials are $250ish. what would be a good BOV for my setup, 10lbs now but 14ish next year when I do the bottom end. Also is the bov going to add performance, or is it just to have a better sound? Thanks in advance for your input?
http://www.youtube.com/watch?v=GKoE5wMleCE
http://www.youtube.com/watch?v=K7sKiVEXvQk
Last edited by SCRMNC5; 05-24-2011 at 03:13 PM.
05-24-2011, 03:06 PM
#23
AKA "The CLOWN"
Thread Starter
Member Since: Feb 2010
Location: Chicago South Suburbs
Posts: 6,261
Likes: 0
Received 12 Likes
on
12 Posts
I'm running the "Big Red" and my car sounds just like a 747. On the other hand my friend Tim is running the Tial 50mm and his sound just like mine does, I can't tell the difference. IMO, they will both do what you want them to do, and also sound awesome. Good luck with your choice. I could post a video of the sound if you like??
05-24-2011, 03:20 PM
#25
Pro
Member Since: Aug 2008
Location: Madison Ct.
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
Here is where mine is located also. It's right in the middle of the charge pipe.
05-24-2011, 03:21 PM
#26
Pro
Member Since: Aug 2008
Location: Madison Ct.
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
05-24-2011, 04:09 PM
#27
Racer
I'm running the "Big Red" and my car sounds just like a 747. On the other hand my friend Tim is running the Tial 50mm and his sound just like mine does, I can't tell the difference. IMO, they will both do what you want them to do, and also sound awesome. Good luck with your choice. I could post a video of the sound if you like??
http://www.youtube.com/watch?v=GKoE5wMleCE
http://www.youtube.com/watch?v=K7sKiVEXvQk
http://www.youtube.com/watch?v=GKoE5wMleCE
http://www.youtube.com/watch?v=K7sKiVEXvQk
Music to my ears!
05-25-2011, 06:46 AM
#30
Melting Slicks
05-25-2011, 10:30 PM
#31
AKA "The CLOWN"
Thread Starter
Member Since: Feb 2010
Location: Chicago South Suburbs
Posts: 6,261
Likes: 0
Received 12 Likes
on
12 Posts
Can someone tell me the difference between the Tial 50, Q, and Sport?
And why can't they give you a flange that is welded to a 3x6 inch pipe? It's a pain in the a$$ to have to find a shop and have it welded!
And why can't they give you a flange that is welded to a 3x6 inch pipe? It's a pain in the a$$ to have to find a shop and have it welded!
05-26-2011, 10:06 AM
#32
AKA "The CLOWN"
Thread Starter
Member Since: Feb 2010
Location: Chicago South Suburbs
Posts: 6,261
Likes: 0
Received 12 Likes
on
12 Posts
I just got off the phone with Brute Speed and they suggested the ATI Procharger Bullet Valve. Does anyone have this on there car? I did a search on you tube and the forum, and nothing came up to hear a video clip. I guess this valve is for 750hp and below and he said it would work well for my application. This is a new product that came out about a year ago!
10-09-2011, 08:44 AM
#33
Melting Slicks
Looking at the ATI Procharger Bullet Valve as well. On ATI's site it cost as much as you can get a big red valve from other venders. Wonder if its better for the lower 600 horse power guys.
10-10-2011, 03:47 PM
#34
Melting Slicks
I run the Vortech Mondo. Its like the enclosed race from Procharger.
Here is a vid.
http://s943.photobucket.com/albums/a...t=SAM_0839.mp4
Here is a vid.
http://s943.photobucket.com/albums/a...t=SAM_0839.mp4
I used to run a Tail a few years ago and no where near as nice a piece as the mondo !
10-10-2011, 07:43 PM
#35
Safety Car
10-15-2011, 12:17 AM
#37
Melting Slicks
