Andy@A&ACorvette

I have these sales once in a while and, as most of you know, they don't last long.
I am a big proponent of using the right head unit for the application. Using a huge head unit and trying to pulley it down or use a restrictor plate is the wrong way to go about it.
It is for that reason we have a very liberal trade in policy at A&A. Use the correct head unit for your stock engine and trade it in for a larger supercharger head unit only if you decide to build a forged engine.
I do not have any complete used kits but what I can do is build a BRAND NEW system with one of these trade in head units.
EVERYTHING in the system will be brand new and 100% complete just as if you ordered a new one from us or one of our dealers, with the exception of the actual head unit.
EVERYTHING is included in all the systems I have listed here and will be BRAND NEW- 60# injectors, fuel pump, custom billet blowoff valve, latest bracket design (no need to remove blower to change belt), polished tubing, stainless constant tension clamps,silicone couplers, our Ram Air Intercooler, powdercoated top shrouds, sheet metal radiator enclosures etc. All head units and brackets are polished.
COMPARE OUR SYSTEMS WITH ANY OTHER. You will find the quality and attention to detail is second to none! You will also get the same customer support we are famous for with any of these systems!

So here are the deals:

I have 2 Si head units ( this is the standard unit supplied in all our kits) that are almost new and were sent to Vortech just to make sure they were 100%. They will come with a 1 year warranty just as if they were new.
New systems with either of these head units will be $800 off.
That's $4695 for a standard C6 or C5 or $5495 for a C6 Z06 or LS3 cars with manual trans and Z51 suspension package. ( Includes a polished CNC machined MAF housing and a new DeWitt's high capacity radiator)
These are every bit as good as a brand new system at a huge savings.

I also have a used T Trim head unit. This is a couple of years old but was on a local car that really hasn't been driven hard. It's in good shape and has no issues.
A kit with this head unit would be $1000 OFF. (the T Trim is an upgrade from the Si trim anyway)
That's $4495 for a standard C6 or C5 or $5295 for C6 Z06 or LS3 cars with manual trans and Z51 suspension package. ( Includes a polished CNC machined MAF housing and a new DeWitt's high capacity radiator)

I have a Procharger P1SC head unit that just came back from Procharger after an overhaul. I can build a brand new system with this Procharger and our newest Procharger bracket design.
A new system with this head unit will be $800 off.
That's $4695 for a standard C6 or C5 or $5495 for a C6 Z06 or LS3 cars with manual trans and Z51 suspension package. ( Includes a polished CNC machined MAF housing and a new DeWitt's high capacity radiator)

I have 1 Si head unit that this brand new except for 7 dyno pulls. We put it on an LS7 with a 6 rib and one of my blower cams just to test.
It made 680 RWHP with a 3.6 pulley.
We pulled it off and put on a T Trim and made 735 RWHP.
It is brand new and comes with the full warranty.
This kit will be $500 off.
That's $4995 for a standard C6 or C5 or $5795 for a C6 Z06 or LS3 car with manual trans and Z51 suspension package. ( Includes a polished CNC machined MAF housing and a new DeWitt's high capacity radiator)

I also have 3 BRAND NEW heads units that have minor exterior flaws or scratches. These are in areas that you can't even see once they are mounted, but I am going to discount them.
Complete systems with any of these head units are going to be $500 off.
Again, that's $4995 for a standard C6 or C5 or $5795 for a C6 Z06 or LS3 car with manual trans and Z51 suspension package. ( Includes a polished CNC machined MAF housing and a new DeWitt's high capacity radiator)

Call me or Steve after 8 AM tomorrow to get in on this deal!

travelingypsye

Once again these are outstanding prices & hard to beat. Thanks Andy. BTW heres a TTT for ya.

0Superman09

Any of those Vortech's V3?

nullpointer

So tempting...GL (although you wont need it )

0Steve@AandACorvette

A couple of them are...

PM with what you are looking for...

SteveDoten

Awesome deals, I've installed a few of these kits this year; Andy, Jesse and Steve are great people to work with!!

www.markscruisenight.com , typically one of my A&A cars will be at this show every Monday night, located here in CT

JanCorvette

pm sent

chevylad

There's one less to order now! I couldn't help it. It's like a sickness.

0Steve@AandACorvette

golfinz

ysi available?

CraZee ZO6

any f1rs? or ysi's? with 8rib or 10 rib i could get a deal on lol
you had a f1r for sale but not sure if it sold.

Andy@A&ACorvette

Might be worth a phone call. I may have a YSI I can deal on.
It will forward to my cell over the weekend.

dstroy

I have heard nothing but good things about A&A, so I ordered a kit friday. Can't wait to get the motor built for it. Thanks Steve. All of my questions were answered and got a good deal.

Now All I have to do is get the motor out the top.

0Steve@AandACorvette

kris6868

Wondering if you had any more kits around?
I want one for a C5.
Email me kris6868@sbcglobal.net
Thanks Kris

Sebring98

Wondering if you had anymore kits available? PM if there are any left. Thanks!

JanCorvette

Andy I have a S-trim supercharger that was just sent to Vortech and gone through. and a 6rib a&a bracket. Do you sell everything else I need as a package? Do i have to buy each component separately?

Josh@AandASuperchargers

You can buy everything else in a kit form. It would be one of our stage 3 upgrade kits. You can view it on our website:
http://www.aacorvette.com/supercharg...products_id=87