0Arun@CCP

We've been selling quite a few of our cams and we figured we put them in a kit to save you some time and money.

After years of testing different cams-we finally came up a few grinds that are designed with lobes that are stable and work great with boost. They have just enough lift that can be controlled with our springs and are easy on the valvetrain-perfect for a car that get's driven.

Our stage 1 cam is great for stock bottom ends, great daily driver cam, makes power right off idle to 7000 rpm. Slight lope and passes emissions.

Stage 2 is for max effort 347-364's and even great for 383's to 427's.
Has more of a lope but still a great daily driver cam.

Stage 3 is 8 second daily driver proven-has gone as fast as 160mph in the quarter-makes big power! 402 cubes and up is needed for this cam.

What were including is 1 of our proven cams,

Extreme Duty dual springs, Ti retainers, Seats, locks and seals

Comp Hi-tech pushrods,

All for $800,

Plus get free shipping this month!


Need a blower to go along with your cam-call us for the best prices on a A&A and ECS supercharger kits!

CamminC5

How about cam only and a dewitts shorty radiator??

Any vids of the Stage 2?

MVP'S ZO6

Arun, Sent ya an email buddy. Not for a cam but other stuff. 10 rib stuff.

Hey guys Arun helped me with a cam for my build and well lets just say that even though my engine builder dont think I will like it, he did say that it is streetable and it will make tons of power. I think ill love it!

robert miller

Arun, Getting parts together now for a new Iron 6.0 block build now. I have the new block and rods now is all. I am in need of a crank, cam, and ALL the other parts to make me up a short block. Give me a p.m. on a really good cam for a 408 build that will work good with a 2800 stall with the YSI unit.... Robert

dascorcha21

not sure which stage cam i have but i can assure you Arun has done his homework and i cant wait to see it deliver at the track!

0Arun@CCP

PM sent!

emerica4601

roughly how big of a cam are we talking for the stage 2?

0Arun@CCP

PM sent-all the cams come with specs.

VR4Gixxer

Could you PM me the stage 2 specs.

Thanks

Z06wanted

bump for a great vendor

01z0666

Do these work in turbo cars?

silverc5cu

If you want to make serious power Arun is the Man to speak to....

robert miller

No will not work f/i and turbo,s use totally diff cams. But I am sure Arun can set you up with a good cam but for sure he will need to know what turbo and your set up in the car... Robert

sami85L98

Iam lucky to have him local an hour drive from me, cant go wrong with this tuner, absolutely no bull no crap, thanks arun for your knowledge and service.

TRIZ

Definitely interested in a cam Arun.
YSi, 346, 241 heads, Andy cam, and 25 psi peak right now.
Any recommendations?

BLOWNBLUEZ06

Arun is one of the greatest Corvette guys that I've had the pleasure of meeting. His cam choice will rock your sh*t!!

c5mtl

Rocked my shi*t

dankhts

I don't have his cam but I have his tune on my heads/cam engine......yurp! He knows his stuff! Can't go wrong with anything from him.....

mig1980

Interested in a cam kit. I will be installing a a&a v2 kit, ls6 intake, yank Ss3200 converter, and 3.42 in my 98 coupe. Need for everything to pass California emissions. Let me know what you recommend.

Thanks

0Arun@CCP

Stage 1 kit will pass emissions and make great power.