Finally Blown!
Jul 4, 2012 | 05:10 AM
Thread Starter
Drifting
Joined: Sep 2006
Posts: 1,571
Likes: 1
From: st.louis mo.
Finally Blown!
Just wanted to say thanks to the guys at e.c.s, arun@ccp and Texas Speed.
E.C.S helped me get all my parts together (bought a used kit) They even sent me some parts overnight when i was in a pinch. Thanks to Arun also for his blower cam.
Mods are as follows:
Texas Speed iron block Forged 408
Novi 2000 blower
83lb injectors
kb boost-a-pump
Mcleod twin disk
Long tubes
Custom blower cam
Stock heads/ls6 intake/upgraded springs
Ls7 lifters and Katech timing chain
I would also like to thank my builder/installer Chad Barton at CB Street Cars.
The car made 688hp and 660tq on a safe tune with no meth.
Its a blast to drive and i'm most impressed with the torque.
Future plans will be Alky/meth kit and upgraded radiator.
Here are a few pics:
Jul 4, 2012 | 09:45 AM
Melting Slicks
Joined: Sep 2006
Posts: 2,728
Likes: 142
From: Iowa
Wow, that's a lot of freakin torque!! Congrats!
Jul 4, 2012 | 11:02 AM
Team Owner
Joined: May 2006
Posts: 21,473
Likes: 356
From: Palmdale, Ca----- 2009 Cyber Gray 4LT A6 F55 452 RWHP 422 RWTQ- RIP 1998 C5 734 RWHP & 585 RWTQ-----
That's pretty cool!
Awesome TQ for sure, jumps straight up there -
Did they explain why it is so up and down at the top?
To me it looks like float or the springs - BUT you replaced them -
What size cam are you running from ARUN?
Everything looks real good and the monster TQ from the cubes is awesome - Vette looks super clean too!
With the Meth it will keep things cooler and you will probably hit 700+ safely!
Keep us posted
Thanks,Matt
Jul 4, 2012 | 11:59 AM
Drifting
Joined: May 2007
Posts: 1,879
Likes: 4
From: st. louis MO
awesome numbers and top notch work from chad at CBI once again!
Jul 4, 2012 | 12:31 PM
Joined: Jul 2010
Posts: 4,504
Likes: 4
From: Waterloo Ontario
Jul 4, 2012 | 12:40 PM
Burning Brakes
Joined: Sep 2004
Posts: 1,089
Likes: 4
From: Ocala FL
Quote:
Originally Posted by
Arun@CCP
Nice buddy!
Nice Setup!
Jul 4, 2012 | 12:47 PM
Le Mans Master
Joined: Jan 2009
Posts: 7,767
Likes: 19
From: East Texas
looks awesome and makes great power!
their is lots more power left in her for sure!
get use to what you have for now!
later you can add meth and crank up the boost!
Jul 4, 2012 | 01:25 PM
Safety Car
Joined: Aug 2004
Posts: 4,734
Likes: 232
From: Youngstown Ohio
That's one great looking ride all the way around.
Show and go, love it!
Darion
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Jul 4, 2012 | 01:41 PM
Safety Car
Joined: Feb 2003
Posts: 3,848
Likes: 95
From: Springfield MO
Awesome build! Looks amazing as well!!
Jul 4, 2012 | 04:32 PM
Burning Brakes
Joined: Jan 2011
Posts: 964
Likes: 92
From: Rio Rancho NM
Jul 4, 2012 | 04:33 PM
Joined: Feb 2010
Posts: 6,261
Likes: 13
From: Chicago South Suburbs
Love that Novi Brother!!!
Nice ride you got there!
Jul 4, 2012 | 04:55 PM
Team Owner
Joined: Jan 2007
Posts: 29,063
Likes: 1,839
From: cookeville tennessee
Quote:
Originally Posted by
Blitzkrieg
Love that Novi Brother!!!
Nice ride you got there!
I see you are back with us clown..
Robert
Jul 4, 2012 | 05:01 PM
Pro
Joined: Sep 2006
Posts: 551
Likes: 0
From: San Antonio Texas
That's awesome!!!
Texas speed 418
Ecs novi2000 here <<<<< 705/640tq
Congrats! And our charts look very similar,stock heads here also
Jul 4, 2012 | 08:01 PM
Thread Starter
Drifting
Joined: Sep 2006
Posts: 1,571
Likes: 1
From: st.louis mo.
Quote:
Originally Posted by
madmatt9471
That's pretty cool!
Awesome TQ for sure, jumps straight up there -
Did they explain why it is so up and down at the top?
To me it looks like float or the springs - BUT you replaced them -
What size cam are you running from ARUN?
Everything looks real good and the monster TQ from the cubes is awesome - Vette looks super clean too!
With the Meth it will keep things cooler and you will probably hit 700+ safely!
Keep us posted
Thanks,Matt
Not sure about up top I didn't even ask. I'll have to talk to the tuner about it. I'm running his stage3 blower cam.
Jul 4, 2012 | 08:05 PM
Thread Starter
Drifting
Joined: Sep 2006
Posts: 1,571
Likes: 1
From: st.louis mo.
Thanks guys! Appreciate the compliments. I'm running 12 pounds of boost. There's plenty of power left on the table especially after I install meth. Right now though I'm just trying to get used to what I have. It's and handful and will break loose at 85mph!
Jul 4, 2012 | 09:52 PM
Joined: Sep 2004
Posts: 82,586
Likes: 1,697
From: Converse TX
Very nice results with your setup
Jul 5, 2012 | 12:26 AM
Burning Brakes
Joined: Jan 2011
Posts: 964
Likes: 92
From: Rio Rancho NM
Nice I wonder what it would hit on 15-16lbs
Jul 5, 2012 | 12:49 AM
Thread Starter
Drifting
Joined: Sep 2006
Posts: 1,571
Likes: 1
From: st.louis mo.
Quote:
Originally Posted by
tcruse
Nice I wonder what it would hit on 15-16lbs
Not sure if my drivetrain could take it
Jul 5, 2012 | 03:11 PM
Melting Slicks
Joined: Jan 2003
Posts: 2,056
Likes: 0
From: monroe city mo
Jul 5, 2012 | 10:24 PM
Melting Slicks
Joined: May 2009
Posts: 2,230
Likes: 395
From: Bmore Maryland
Nothing like being blown, nice numbers congrats