Here is a nice mod for everyone
#3
Burning Brakes
Thanks for posting this Arun!
With the valve cover spacers I can add a nonreversible tremie pipe and the sinusoidal semi-bolloid stator slots...
Should add about 50 Cholmondeleys at the wheels.
With the valve cover spacers I can add a nonreversible tremie pipe and the sinusoidal semi-bolloid stator slots...
Should add about 50 Cholmondeleys at the wheels.
#6
Supporting Vendor
Thread Starter
#11
Le Mans Master
Member Since: Sep 2003
Location: Farmington CT
Posts: 6,125
Received 160 Likes
on
125 Posts
Cruise-In VII Veteran
Urban has a setup like this also; it's not often posted here on the boards(aft steam vents), but I wonder if this is causing the havoc that takes out the ole number 7 cylinder often.
#14
Le Mans Master
If that is really only $80 for the Trick Flow kit, thats a great option!
We built my own cross overs using Kurt Urban's billet adapters for the heads, then used all AN fittings to plumb it all together with black braided hose.... For what we spent, We could have easily just bought the hole Kurt Urban kit with the box and all that for $250....
I just didnt want to have that big a$$ box sitting RIGHT on top of the intake...-aka ugly as hell..
The Trick Flow kit is a much cheaper option...
We built my own cross overs using Kurt Urban's billet adapters for the heads, then used all AN fittings to plumb it all together with black braided hose.... For what we spent, We could have easily just bought the hole Kurt Urban kit with the box and all that for $250....
I just didnt want to have that big a$$ box sitting RIGHT on top of the intake...-aka ugly as hell..
The Trick Flow kit is a much cheaper option...