Vette Hot Rod

Hi all,

Wanted to ask for some quick help. Does anyone know the thickness of the Kenne Bell pulley bracket spacer(donut) or tool? I need to get my setup mounted and KB doesn't sell either to support anymore. I talked to Jeff and he didn't have any either.

Thanks,

Tyler

NITRO UK

Hi mate

I don't have my car anymore and the tool went with it,are you ref to the large front plate,just behind the top main pulley ?
All I have is a few pics,maybe you can get an idea of position.
Other thing you could try is a laser on the tentioner and see if you can line it up with the others.Can dig out some more pics if you think it may help.

Vette Hot Rod

Hi Nitro, actually looking for the thickness of the spacer or tool that positions that bracket on the blower snout. I have a laser I am going to try but Jeff told me I would have trouble getting it right without the tool.

Thanks,

Tyler

Vette Hot Rod

By the way, always loved your build Nitro... One of the inspirations for mine! Not many KB guys around... I basically redesigned the kit so we will see what it does. No illusions on the limitations but it is just a street ride anyway.

Tyler

NITRO UK

Cool bud.
I was going to start guessing and say the tool was aprox 1" but don't go there

I`ll check my notes just incase I have the info.

Mine was the only kb in the uk,and now it`s in France somewhere.

Maybe go to that old thread,think there was a guy AVB ,good guy and helpful.

Can`t believe kb aren`t able to give you that info.

Working on something else now,but should never have sold my Z .

I`m sure you will get it sorted,just a pita eh