Dyno numbers from new motor.
06-14-2018, 10:18 AM
#1
Melting Slicks
Thread Starter
Dyno numbers from new motor.
Had Mikey build me a new 377 and here is the after math. 
06-14-2018, 11:25 AM
#3
Melting Slicks
Thread Starter
377 cubes
AFR 230 heads with BTR springs
Cammotion cam
Dragon Slayer Crank
Ultra I mean rods
Weisco pistons
Johnson lifters
keep in mind this is going through an auto
AFR 230 heads with BTR springs
Cammotion cam
Dragon Slayer Crank
Ultra I mean rods
Weisco pistons
Johnson lifters
keep in mind this is going through an auto
06-14-2018, 11:27 AM
#4
Melting Slicks
It looks like a very healthy and efficient combo. Crazy how high in the power band it carries the torque. Have you made any hits on the street or track yet?
06-14-2018, 11:35 AM
#5
Melting Slicks
06-14-2018, 12:18 PM
#6
Melting Slicks
Thread Starter
06-14-2018, 12:18 PM
#7
Melting Slicks
Thread Starter
06-14-2018, 09:08 PM
#8
Race Director
Member Since: Dec 2010
Location: Atlanta, GA
Posts: 10,426
Received 1,260 Likes
on
1,055 Posts
2020 Corvette of the Year Finalist (performance mods)
C5 of Year Winner (performance mods) 2019
can't blame him, I would like it too
The following users liked this post:
MVP @ TheRaceEngineShop (06-15-2018)
06-15-2018, 03:40 PM
#12
Wow that makes me feel better about my LS3 block. Damn dude you're nuts. I wouldn't plan on making that much power thru an auto with a stock LS3 block for long but hope you do!
06-15-2018, 04:21 PM
#13
Melting Slicks
Thread Starter
06-15-2018, 04:22 PM
#14
Melting Slicks
Thread Starter
06-15-2018, 04:24 PM
#15
Melting Slicks
Thread Starter
06-15-2018, 09:38 PM
#16
Former Vendor
06-15-2018, 10:38 PM
#17
Melting Slicks
Ohhh nice killer numbers. I am putting together a similar parts combo ysi B on iron 6.0 block. I have a 2.85 pulley considering a 2.7.
Last edited by Robert 2000; 06-15-2018 at 10:39 PM.
