Elite Engineering’s PCV Oil Catch
#1
Drifting
Thread Starter
Elite Engineering’s PCV Oil Catch
where did you guys mount your catch cans with your supercharger installed? pics would be nice! according to elite and there diagram for a 2004 pvc system, its said remove the hose with check valve but nothing about reinstalling it? just want to make sure. thanks!
Last edited by 04zjimc; 12-23-2019 at 08:21 PM.
#2
Instructor
You can see my catch can on the passenger side, not elite engineering but that's the location we picked.
Last edited by itsslow98; 12-23-2019 at 08:57 PM.
The following users liked this post:
CorvetteBrent (12-30-2019)
#3
Drifting
I don't have the EE can, but you can easily remove one of the blower bracket washers and mount the can that way. Might have to cut or mod the bracket slightly. With the 04 PCV system, make sure you have a check valve installed between the can and intake manifold so you don't pressurize the can or crankcase.
Last edited by aaronc7; 12-23-2019 at 11:09 PM.
The following users liked this post:
CorvetteBrent (12-30-2019)
#4
Drifting
Thread Starter
So the instructions say for the 04 leave oem check valve and attach the hose to that then the can.does this have to be setup different with a supercharger?
Last edited by 04zjimc; 12-26-2019 at 10:45 PM.