Any experts here around Omaha or surrounding areas?
#1
Le Mans Master
Thread Starter
Any experts here around Omaha or surrounding areas?
I recently sold my C5z with everything done to it including the kitchen sink. Car ran great, dyno'd great, drove it 400-500 miles. The night before, my builder noticed the belt was slightly not tracking correct though it pulled awesome and ran fine. Blower pulley on an ECS Novi 2000/2500 kit was shimmed out a tad.
The car has had an idler bolt sticking out seizing that pulley to where it's not turning. I've spoken with the owner, saw a pic, but I'm not there and neither is my builder.
Should be a quick fix for experienced blower guys. Looking if you guys are in the area or have racing buddies that do that can tackle it. Share with your racing buddies if you don't mind.
-Mark
The car has had an idler bolt sticking out seizing that pulley to where it's not turning. I've spoken with the owner, saw a pic, but I'm not there and neither is my builder.
Should be a quick fix for experienced blower guys. Looking if you guys are in the area or have racing buddies that do that can tackle it. Share with your racing buddies if you don't mind.
-Mark