CXRacing Single Turbo "Street Car"
#41
Melting Slicks
Thread Starter
RSI Double w/ Walboro 525
Just have to crimp the fuel level sender wires, install the prefilters and pop it in.
#45
Melting Slicks
Thread Starter
#46
Melting Slicks
Thread Starter
Just got my Corvette Creationz carbon fiber flared front fenders to replace my heavily worn(also have a 5" hole in the passenger fender from former downpipe exit) OEM fenders and I am fairly disappointed with how they arrived. There was zero damage to the box they were shipped in so I'm assuming this damage occurred during packaging or storage. I'm not blaming Pete as I know he uses Extreme Dimensions for production and everything ships from them but I was planning on running these in exposed carbon and it looks as though I'll need to get them painted. Again, the overall quality is fine but the damage to the finish is the only thing I am upset about; I went through very similar issues when I ordered my hood so I guess I should have learned from that experience.
#50
Melting Slicks
Thread Starter
Yes, really unhappy about that.
Yes they do, I'll share more pictures as I install them.
#52
Melting Slicks
Thread Starter
It is night and day difference compared to their original hanger. The electrical connector is hermetically sealed which is where all my issues with the original hanger originated from. It appears to be very well made and install should be incredibly simple. I also appreciate that they supplied the mating connectors for the fuel level sender and fuel pump power/ground wires. Overall I am very happy with the appearance of this hanger and now I just need to get it installed, fill it with E85 and make sure I don't have any fuel leaks.
The following users liked this post:
mykream (03-28-2019)
#54
Burning Brakes
what headlights
cool project bro
cool project bro
#55
Melting Slicks
Thread Starter
#56
Melting Slicks
Thread Starter
#57
AMP Racing
Member Since: Aug 2006
Location: Washington TWP NJ
Posts: 10,446
Received 466 Likes
on
352 Posts
2023 C5 of the Year Finalist - Modified
2017 C5 of Year Finalist
St. Jude Donor '09-'10-'11-'12
Demand your money back on those fenders. Complete bullshit a company can send crap like that out the door. Might not be “pete’s“ fault, but it’s the company he chooses to use as a supplier. So, yeh, it’s his fault.
#58
Melting Slicks
Thread Starter
I'm talking to him about it now. The issue is that these were the last set of carbon fenders he had and the reason I didn't go with FRP is because I didn't want to spend money to paint them and I don't mind the look of exposed carbon. Hopefully we can come to some sort of resolution that keeps me from having to buy and wait for another set of fenders to be made.
#60
Supporting Vendor
Hey Mitch, I can help you with properly repairing that if you don't want to paint them. give me a call and I'll go over it with you.
Just got my Corvette Creationz carbon fiber flared front fenders to replace my heavily worn(also have a 5" hole in the passenger fender from former downpipe exit) OEM fenders and I am fairly disappointed with how they arrived. There was zero damage to the box they were shipped in so I'm assuming this damage occurred during packaging or storage. I'm not blaming Pete as I know he uses Extreme Dimensions for production and everything ships from them but I was planning on running these in exposed carbon and it looks as though I'll need to get them painted. Again, the overall quality is fine but the damage to the finish is the only thing I am upset about; I went through very similar issues when I ordered my hood so I guess I should have learned from that experience.