When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The LSA Blower base itself will hit the cowl. If you dont mind cutting it up you can fit it as well as figuring out the hood. In this picture the cradle is lowered 1/4" and the blower hitting the cowl still needed to go back about 1/4" to line up the bolt holes. It was a test fit for giggles LSA test fit on a C5 with lowered cradle
The LSA Blower base itself will hit the cowl. If you dont mind cutting it up you can fit it as well as figuring out the hood. In this picture the cradle is lowered 1/4" and the blower hitting the cowl still needed to go back about 1/4" to line up the bolt holes. It was a test fit for giggles LSA test fit on a C5 with lowered cradle
Was this with port adapter plates too? If not those will add some height.
Keep in mind fellas when Faster5 posted his question it was posted in the wrong section so he didn't see all the LSA threads we know of. Jack moved this thread to here with the others.
02-27-2019, 12:01 AM
