When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Very nice! What offsets did you end up running? I have been craving the L5-R quarters for my car as well.
I think it's the best fender out there for the C5 platform...very subtle and covers an 18x12 with 335 tire perfectly. I think I may even be able to fit an 18x13 honestly. If you want the exact specs get in touch with Jonathan at BC Forged wheels, he is a sales rep. i don't think they have done a C5 with these fenders before but he absolutely nailed it!!! He specced out the setup and hit it spot on. I think 57 in the front and 50 in the back...backspace for the rear I believe is 8.25. Not sure where the spec sheet ended up to be honest so dont take these numbers to the bank.
Again, call Jonathan and he will set you up with a fresh set of BC Forged wheels also
Picked this up a couple months ago completely stock.
Mods
18x10.5 all around and c6zo6 brakes
295/35/18 rear and 285/30/18 front
Going 315’s on all four corners
Ridetech or Forgeline Z06 with 315's all around, the woman I talked to at Goodguys says they will rub in front, but they also have different wheels with probably different offsets from stock.
Last edited by 6speedsteve; 06-04-2018 at 09:40 AM.
Stop to take photos of a train, this is what I got.
Mark.
I see what you did there with the decklid Mark, and I like it! I have a thing for stickers...See MacBook....See home toolbox...I have a Snapon toolbox at work, not a single sticker on it. Sorry. HOWEVER, on top of it I have a nut and bolt bin that's covered. Now I want to do my decklid. Thanks for the idea!!
Cleaned up and street tires/wheels on. Ready for the track with 315 Hoosiers all around and C6 replicas plus new brakes at all 4 corners.
I just was checking out how it fits on the trailer and adjusting everything from ramps to tire stop to trailer fender removal to make for a smooth transport to the track (Mid Ohio) Wed. Can't wait.
I love the C6 wheels in black. Are they the same size as original Z06 wheels?
I have a set of stock size tires for my 2004 Z06 and would like an extra set of wheels in black.
Where did you find those?
Originally Posted by Octagon8
Cleaned up and street tires/wheels on. Ready for the track with 315 Hoosiers all around and C6 replicas plus new brakes at all 4 corners.
I just was checking out how it fits on the trailer and adjusting everything from ramps to tire stop to trailer fender removal to make for a smooth transport to the track (Mid Ohio) Wed. Can't wait.
I love the C6 wheels in black. Are they the same size as original Z06 wheels?
I have a set of stock size tires for my 2004 Z06 and would like an extra set of wheels in black.
Where did you find those?
The wheels came with the car when I bought it as an extra set for track use. They are 18 X 10.5 all around for a square set up with 315 Hoosiers R7s. I have 2 identical wheels but in silver that are 18 X 9.5 I plan to paint black to match. It just depends on if you want a square set up or the staggered width. I don't know if they make them in 17" dia to match factory C5 or to use current tire sizes.
I found a set of wheels in stock C5 Z06 size that uses the stock size tires of which I have an extra set.
Thanks.
Originally Posted by Octagon8
The wheels came with the car when I bought it as an extra set for track use. They are 18 X 10.5 all around for a square set up with 315 Hoosiers R7s. I have 2 identical wheels but in silver that are 18 X 9.5 I plan to paint black to match. It just depends on if you want a square set up or the staggered width. I don't know if they make them in 17" dia to match factory C5 or to use current tire sizes.
06-04-2018, 01:32 AM
Very nice! What offsets did you end up running? I have been craving the L5-R quarters for my car as well.
