Nice Mod But Could Have Made It Myself (Pics)
#1
Racer
Thread Starter
Member Since: May 2003
Location: L. I. NY
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
Nice Mod But Could Have Made It Myself (Pics)
After I received it in from UPS today and opened it up I realized I could have saved some cash and went to Home Depot to buy the material and make it.
It was still the cheapest of any other vendor with free S&H. Total was $49.95
If you want to make one the dimensions were exactly 1' x 2'3.5" ( One foot by two feet three and one half inches).
All you have to do is remove the 5, 9/32" screws that hold the bottom air shroud to the front fender, slip the piece of aluminum screen in and replace the 5 screws.
Took me about 5 min. with the car already on the 4 post lift.
It was still the cheapest of any other vendor with free S&H. Total was $49.95
If you want to make one the dimensions were exactly 1' x 2'3.5" ( One foot by two feet three and one half inches).
All you have to do is remove the 5, 9/32" screws that hold the bottom air shroud to the front fender, slip the piece of aluminum screen in and replace the 5 screws.
Took me about 5 min. with the car already on the 4 post lift.
#3
Supporting Tuner
Thanks. I made one last week out of Home Depot screen mesh (fibreglass black)
#5
Racer
Thread Starter
Member Since: May 2003
Location: L. I. NY
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Dirty Howie
Thanks for the pics and the measurements!!
Is it flat or is there some curvature to it ??
DH
Is it flat or is there some curvature to it ??
DH
#7
Racer
Thread Starter
Member Since: May 2003
Location: L. I. NY
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by vectorz
Not sure I understand what the heck is it?
#11
Team Owner
Thanks for the info, I never bought one because I thought the mark up was way to high. It should come with one from the factory.
#15
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,982
Received 19,300 Likes
on
13,973 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Thanks for the heads-up. Might as well save a few dollars if you can.
#17
Melting Slicks
Member Since: Jul 2004
Location: Edmond, OK...One of the first rules of online forums: If you don't like what is said but can't refute it, attack the poster.
Posts: 2,567
Likes: 0
Received 1 Like
on
1 Post
what kind of screen mesh do u find thats 1'x 2' ? All I can find are the rain gutter mesh thingys and they're only like 6" x 3'.
jeff
jeff
#18
Instructor
Member Since: Jul 2004
Location: Cleveland Oh
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
Some hardware stores and Home Depots/Lowes will carry something called expanded metal. It comes in 36"X36" or larger sheets. Its pretty cheap also. I would look for Aluminum over steel, obiously.
#19
Was there any noticeable SOP difference after the install? I am sure that you have not had time to check for any increase in torque or RWH with a dyno run.
Actually looks like a useful addition, lots of debris on the roadways around here.
Actually looks like a useful addition, lots of debris on the roadways around here.
#20
Melting Slicks
Member Since: Jul 2004
Location: Edmond, OK...One of the first rules of online forums: If you don't like what is said but can't refute it, attack the poster.
Posts: 2,567
Likes: 0
Received 1 Like
on
1 Post
Ok, I just went to HomeDepot and Lowes. Neither of them knew what I was talking about when I said expanded metal sheets or any kind of metal mesh sheet in a 36"x36" size or similar. Sooooo, what department is this expanded metal sheet in at Home Depot or Lowes?
jeff
jeff