Quick! Bronze gear!
12-30-2005, 07:08 PM
#1
Drifting
Thread Starter
Member Since: Jan 2005
Location: Spring Hill, Florida Life is all about new beginnings;...TRY ONE!
Posts: 1,600
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '07-'08
Quick! Bronze gear!
Where is the best place to get that bronze gear for my headlights. I need it quickly!
Just got that horrible noise when I turned off my headlights!
Just got that horrible noise when I turned off my headlights!
12-30-2005, 07:22 PM
#3
Heel & Toe
Member Since: Nov 2004
Location: Charlotte N C
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
talon is correct. I purchased from Mr. Dickman this past July. I ordered mine on a Sun. and received them on Tues. He includes excellent instructions also. Bruce
12-30-2005, 07:55 PM
#5
Race Director
Just did mine this week - got the kit from Rodney Dickman too.
My hands and forearms are still scabbing over.....
It's actually easy once you have the headlight assembly out - but getting the two bolts on the side into the frame and the three on the back mounted to the fender is like sticking your hands into a meat grinder! (I guess my hands and forearms are too fat for this job.... 
)
Good luck - and replace both of them even if it's only one acting up!
My hands and forearms are still scabbing over.....
It's actually easy once you have the headlight assembly out - but getting the two bolts on the side into the frame and the three on the back mounted to the fender is like sticking your hands into a meat grinder! (I guess my hands and forearms are too fat for this job.... )Good luck - and replace both of them even if it's only one acting up!
12-30-2005, 07:59 PM
#6
Racer
Member Since: Jun 2004
Location: Corinth MS
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
If you put the car up on ramps you can remove a lower cover that gives you plenty of access to get to all of the bolts. It makes it alot easier than trying to get your arm in under the headlight.
