The Well Adjusted Annals : Stangkiller & EG install a clutch [Dialup: You *will* die]
#1
Supporting Tuner
Thread Starter
The Well Adjusted Annals : Stangkiller & EG install a clutch [Dialup: You *will* die]
I took a break from Grond's Reincarnation, and went over to Stangkiller's house in Orlando this weekend to help him install Well Adjusted's (Mike) Spec 3 clutch & flywheel, along with a new slave, pilot bearing, remote bleeder and drill mod.
Everything went pretty well except for a couple of minor snags that slowed us down a little. The video of Well Adjusted's MY Vert is awesome - his car sounds nasty!!! Not to be missed.
Video of Well Adjusted's cammed Vert
Here are the pics
Spec 3 clutch - what a monster!
New clutch slave, remote bleeder and drill mod
Getting the drivetrain out
LG Pro long tube headers - beautiful workmanship
And a RPM (Rodney) transmission
Made a parts run to get a new slide hammer - and saw the Space Shuttle launch!!!
WOW!!!
Pilot bearing was a bear to remove - we had the wrong sized tool. It came out eventually.
Stangkiller looking for his bunny suit...
New billet steel Spec flywheel installed
And clutch and pressure plate
Well Adjusted watching us work
But now he's lending a hand...
Drivetrain back in; just need to lock it all down
Attention Photochoppers : Please chop only the blonde kid....
Putting the final touches
Mike (Well Adjusted) seems happy (what a relief!)
His Vert is a beauty...
Time to take that bad boy for a shakedown ride
Everything went pretty well except for a couple of minor snags that slowed us down a little. The video of Well Adjusted's MY Vert is awesome - his car sounds nasty!!! Not to be missed.
Video of Well Adjusted's cammed Vert
Here are the pics
Spec 3 clutch - what a monster!
New clutch slave, remote bleeder and drill mod
Getting the drivetrain out
LG Pro long tube headers - beautiful workmanship
And a RPM (Rodney) transmission
Made a parts run to get a new slide hammer - and saw the Space Shuttle launch!!!
WOW!!!
Pilot bearing was a bear to remove - we had the wrong sized tool. It came out eventually.
Stangkiller looking for his bunny suit...
New billet steel Spec flywheel installed
And clutch and pressure plate
Well Adjusted watching us work
But now he's lending a hand...
Drivetrain back in; just need to lock it all down
Attention Photochoppers : Please chop only the blonde kid....
Putting the final touches
Mike (Well Adjusted) seems happy (what a relief!)
His Vert is a beauty...
Time to take that bad boy for a shakedown ride
#5
Supporting Tuner
Thread Starter
Originally Posted by connecticut
#11
Supporting Tuner
Thread Starter
Originally Posted by Kryms3n
OK
#15
Supporting Tuner
Thread Starter
Originally Posted by Bonsai
Did I see the sun go down and back up during that project?
#20
Team Owner
Forget about the space shuttle, when is grond going to launch