[Z06] Another Shifter Thread
Race Director
Joined: Sep 2005
Posts: 11,060
Likes: 291
From: Pasco WA
Had one. Very short throws, and fairly precise. Fully adjustable handle allowing you to customize the **** to an ideal position. Mine was notchy through the neutral gate, and when pushed, had problems going into 4th gear. I believe there's better options, such as (what I got) the C6Zo6, the MTI 6-shooter, and the improved B&M.
Thread Starter
Pro
Joined: Sep 2004
Posts: 560
Likes: 1
From: Dacula GA
Had one. Very short throws, and fairly precise. Fully adjustable handle allowing you to customize the **** to an ideal position. Mine was notchy through the neutral gate, and when pushed, had problems going into 4th gear. I believe there's better options, such as (what I got) the C6Zo6, the MTI 6-shooter, and the improved B&M.
Racer
Joined: Oct 2005
Posts: 401
Likes: 0
From: O'Fallon MO
I have that particular shifter. I would say its one of the shortest throwing shifters out there. I drove a friends C-5 with a B&M shifter and it was just as notchy. There is a small fix for the notchyness in the tranny. Look for it in a different thread. I can't even remember what they called it. But I know it has to do with the detent ball in the top of the tranny.
Good luck.
Good luck.
Melting Slicks
Joined: Apr 2000
Posts: 2,920
Likes: 2
From: North Bend WA
You might be referring to the "anti-venom" mod? There are definitely some numerous threads around here regarding that mod. 
I have that particular shifter. I would say its one of the shortest throwing shifters out there. I drove a friends C-5 with a B&M shifter and it was just as notchy. There is a small fix for the notchyness in the tranny. Look for it in a different thread. I can't even remember what they called it. But I know it has to do with the detent ball in the top of the tranny.
Good luck.
Good luck.
Melting Slicks
Joined: Feb 2003
Posts: 2,438
Likes: 12
From: Fort Worth TX
Had one. Very short throws, and fairly precise. Fully adjustable handle allowing you to customize the **** to an ideal position. Mine was notchy through the neutral gate, and when pushed, had problems going into 4th gear. I believe there's better options, such as (what I got) the C6Zo6, the MTI 6-shooter, and the improved B&M.
Le Mans Master
Joined: May 2003
Posts: 5,362
Likes: 3
From: Delray Beach FL
Had it in my Z06 for 3 days and tore it out. I have a bad right shoulder and it tore up the muscles, even with the lightest springs in it. Was very well made, but I couldn't take shifting with it. Went back to factory, sold it to another forum member (forgot who now, was 2 years ago) and that member loved it.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Race Director
Joined: Sep 2005
Posts: 11,060
Likes: 291
From: Pasco WA
The C6Z has a much shorter handle, and is more precise. The throws are a little shorter, and it's no more notchy. BTW, I did the "anti-venom mod" and it didn't help at all.
Melting Slicks
Joined: Jul 2006
Posts: 2,094
Likes: 5
From: The 7th layer of hell - Western Washington
If you want to substiantially shorten throw, add precision, and add a little extra force perform the anti-venom mod and install your short shifter.
My final magical combination was: MTI 6-shooter, anti-venom, AmsOil ATF, dynomat all around and on the shifter, F-body shift ****, and many attempts at adjusting the shift box assembly.
Realistically it all comes down to each persons preference, but it feels perfect to me now - and my main complaint about the car was how it shifted...
My final magical combination was: MTI 6-shooter, anti-venom, AmsOil ATF, dynomat all around and on the shifter, F-body shift ****, and many attempts at adjusting the shift box assembly.
Realistically it all comes down to each persons preference, but it feels perfect to me now - and my main complaint about the car was how it shifted...
Drifting
Joined: Mar 2006
Posts: 1,872
Likes: 7
From: Richmond VA
I put in a C6Z shifter and hated it. IMO, it wasnt any shorter shifting than the stocker. It was physically a little shorter, but still felt too loose for me. The only thing I liked was the shift ****.
I ended up with the Kirban. They make one that will accept the C6Z ****. So, I have a Kirban with a C6Z ****. Feels identical to the Hurst. Love it!!!
I ended up with the Kirban. They make one that will accept the C6Z ****. So, I have a Kirban with a C6Z ****. Feels identical to the Hurst. Love it!!!
Melting Slicks
Joined: Feb 2002
Posts: 2,148
Likes: 1
From: GA
I had this shifter as well in my 2004 Z06 and removed it after a few weeks. To much side to side effort and it rattled like crazy. I have had stock, shortened stock, Hurst, BPP and now MTI. I have found the MTI the best of all of these so far...
