Let Us Color Match Paint and Marble Finish Any Piece On Your C5 Corvette
06-09-2009, 01:30 AM
#1
Former Vendor
Thread Starter
Member Since: Jan 2008
Location: Tampa/Holder Florida
Posts: 479
Likes: 0
Received 2 Likes
on
1 Post
Let Us Color Match Paint and Marble Finish Any Piece On Your C5 Corvette
We bring you the ultimate in Corvette customization with our in house custom paint and hydroclad service. Our custom finished pieces have graced many award winning show cars all across the country. Our parts can be found on many SEMA show cars that we have done for private customers as well as businesses. Our Carbon Fiber Look Fuel Rail Covers can even be found on the pair of GM’s Gold Rush Green E85 Pace cars and our Velocity Yellow Carbon Fiber look third brake light spoiler has graced the back of the #3 C6R in the American Lemans Series.We have told you where our parts have been now let us tell you about our process.
Our paint process allows us to offer several outstanding custom finishes in all your C5 and C6 colors. Our process can be done on any plastic piece of your Corvettes exterior,interior and engine compartment. We use only the best PPG Paints and Clears that are used on a majority of show car paint jobs. After your part is finished in our process, it is wet sanded and buffed by hand to a brilliant show quality shine. We sand all textured pieces smooth before we begin our process no mat look!!! No job is to big or to small for us!!! If you are looking to have just one piece done or every piece on your show car we have you covered!!!! If your looking to have everyone crowded around your Vette, and long to be the star at the show,then Our Custom Paint and Hydroclad Parts Are What You Need!!!
We offer Solid Colors,Carbon Fiber Look, Marble Look, Granite Look, Snake Skin Look, Streak Look, Splash, all of which can be done in your Cars color!!! Some of our finishes like Marble and Steak are as
unique as your finger print because no two patterns are the same. If you are just looking for the look of Black or Dark Gray Carbon Fiber we can do that also. We also offer many woodgrain finishes as well for your interior.
Our paint process allows us to offer several outstanding custom finishes in all your C5 and C6 colors. Our process can be done on any plastic piece of your Corvettes exterior,interior and engine compartment. We use only the best PPG Paints and Clears that are used on a majority of show car paint jobs. After your part is finished in our process, it is wet sanded and buffed by hand to a brilliant show quality shine. We sand all textured pieces smooth before we begin our process no mat look!!! No job is to big or to small for us!!! If you are looking to have just one piece done or every piece on your show car we have you covered!!!! If your looking to have everyone crowded around your Vette, and long to be the star at the show,then Our Custom Paint and Hydroclad Parts Are What You Need!!!
We offer Solid Colors,Carbon Fiber Look, Marble Look, Granite Look, Snake Skin Look, Streak Look, Splash, all of which can be done in your Cars color!!! Some of our finishes like Marble and Steak are as
unique as your finger print because no two patterns are the same. If you are just looking for the look of Black or Dark Gray Carbon Fiber we can do that also. We also offer many woodgrain finishes as well for your interior.
We Feel Our Quality Will Speak For Itself and We Will Go Head To Head ON Quality Comparison With Our Competitors Any Day Of The Week.
Just let us know what you would like done and we will give you a price quote. We can do our process on any Plastic or Metal Piece of your C5!!!Just Take It Off And Send It To Us!!!
Turn around time is usually 1 week!
www.vetteworksintl.com
[/CENTER]
Just let us know what you would like done and we will give you a price quote. We can do our process on any Plastic or Metal Piece of your C5!!!Just Take It Off And Send It To Us!!!
Turn around time is usually 1 week!
www.vetteworksintl.com
06-15-2017, 11:01 PM
#2
We bring you the ultimate in Corvette customization with our in house custom paint and hydroclad service. Our custom finished pieces have graced many award winning show cars all across the country. Our parts can be found on many SEMA show cars that we have done for private customers as well as businesses. Our Carbon Fiber Look Fuel Rail Covers can even be found on the pair of GM’s Gold Rush Green E85 Pace cars and our Velocity Yellow Carbon Fiber look third brake light spoiler has graced the back of the #3 C6R in the American Lemans Series.We have told you where our parts have been now let us tell you about our process.
Our paint process allows us to offer several outstanding custom finishes in all your C5 and C6 colors. Our process can be done on any plastic piece of your Corvettes exterior,interior and engine compartment. We use only the best PPG Paints and Clears that are used on a majority of show car paint jobs. After your part is finished in our process, it is wet sanded and buffed by hand to a brilliant show quality shine. We sand all textured pieces smooth before we begin our process no mat look!!! No job is to big or to small for us!!! If you are looking to have just one piece done or every piece on your show car we have you covered!!!! If your looking to have everyone crowded around your Vette, and long to be the star at the show,then Our Custom Paint and Hydroclad Parts Are What You Need!!!
We offer Solid Colors,Carbon Fiber Look, Marble Look, Granite Look, Snake Skin Look, Streak Look, Splash, all of which can be done in your Cars color!!! Some of our finishes like Marble and Steak are as
unique as your finger print because no two patterns are the same. If you are just looking for the look of Black or Dark Gray Carbon Fiber we can do that also. We also offer many woodgrain finishes as well for your interior.
Our paint process allows us to offer several outstanding custom finishes in all your C5 and C6 colors. Our process can be done on any plastic piece of your Corvettes exterior,interior and engine compartment. We use only the best PPG Paints and Clears that are used on a majority of show car paint jobs. After your part is finished in our process, it is wet sanded and buffed by hand to a brilliant show quality shine. We sand all textured pieces smooth before we begin our process no mat look!!! No job is to big or to small for us!!! If you are looking to have just one piece done or every piece on your show car we have you covered!!!! If your looking to have everyone crowded around your Vette, and long to be the star at the show,then Our Custom Paint and Hydroclad Parts Are What You Need!!!
We offer Solid Colors,Carbon Fiber Look, Marble Look, Granite Look, Snake Skin Look, Streak Look, Splash, all of which can be done in your Cars color!!! Some of our finishes like Marble and Steak are as
unique as your finger print because no two patterns are the same. If you are just looking for the look of Black or Dark Gray Carbon Fiber we can do that also. We also offer many woodgrain finishes as well for your interior.
We Feel Our Quality Will Speak For Itself and We Will Go Head To Head ON Quality Comparison With Our Competitors Any Day Of The Week.
Just let us know what you would like done and we will give you a price quote. We can do our process on any Plastic or Metal Piece of your C5!!!Just Take It Off And Send It To Us!!!
Turn around time is usually 1 week!
www.vetteworksintl.com
[/CENTER]Just let us know what you would like done and we will give you a price quote. We can do our process on any Plastic or Metal Piece of your C5!!!Just Take It Off And Send It To Us!!!
Turn around time is usually 1 week!
www.vetteworksintl.com
Feel free to hit me up here or message me.
Thanks.
