Exhuast gasket Part number
#1
Burning Brakes
Thread Starter
Exhuast gasket Part number
Any one have the part number for the gasket that goes between the Hpipe or Xpipe and the exhaust? Or is there one at a parts store that is readily avalible?
#2
Advanced
Sorry, I don't know the part number. I had to drop my Hpipe unexpectedly a few months ago, and ended up using Permatex Ultra Copper Maximum Temperature RTV Silicone Gasket Maker instead of the factory gaskets.
#4
Racer
Bought mine at O'Reilly, cheap, but don't remember the part # at the moment. If I find it, I'll let you know.
#5
Burning Brakes
Thread Starter
Do you know What they call it cause typing in Exhaust gasket doesn't make it pop up. Everything else does. Been searching the parts store websites and cant find it. Also tried to search here
.
.
Last edited by Johnny wangwang; 02-26-2016 at 12:16 PM.
#7
Burning Brakes
Thread Starter
10276792 is the part number apparently. Thanks for the help guys. Hopefully this helps someone in the future. Not really into making my own gaskets and I hate RTV after owning Nissans which use it for like all the gaskets lol.
#12
Burning Brakes
Thread Starter
#15
Melting Slicks
I used one walker and one GM oem and the fitment was the same. Holding the two up together there was a little size difference but did not make any difference in its working.
The difference in price was definitely not worth it.
The difference in price was definitely not worth it.
#16
Burning Brakes
Thread Starter
Just because I said I would. I think the OEM gaskets are multi layer. If they are then I think they are worth the price difference if you pull your Xpipe off as much as I do. Anyone have a picture or can you confirm. Might take these back and order oem if they are multi layer. These can only be used like twice before they start falling apart.